Drivers door central lock

B

bonnybrook

Active Member

Posts

424

• Feb 6, 2012

• #1

Seems every year my something break on the Freelander as soon as the freezing starts!

Driver door central lock, it will lock using remote but the won't unlock. Can operate lock or unlock with key. Opens fine from inside handle.

I had one rear door lock seize during cold in 2009 but managed to remove, strip down and been fine ever since.

Anyone know if something likely to have snapped/worn in front. looks a pain to get to that bolt and remove so is it worth getting new for the 60 quid they are?

 

Mantamad

New Member

Posts

1,067

Location

Fife Scotland

• Feb 6, 2012

• #2

Usually one of the internal solenoids within the lock fails and the usual symptom of locking ok but not unlocking with the fob starts Only option is to replace the entire latch but its easy enough to fit.

 

B

bonnybrook

Active Member

Posts

424

• Feb 6, 2012

• #3

Mantamad said:

Usually one of the internal solenoids within the lock fails and the usual symptom of locking ok but not unlocking with the fob starts Only option is to replace the entire latch but its easy enough to fit.

Click to expand...

that right hand bolts a pain - I will attempt when it warms up a bit! Looks like handle needs to come off to allow access to internal release cable.

 

Mantamad

New Member

Posts

1,067

Location

Fife Scotland

• Feb 6, 2012

• #4

Yes, take off the door card and that gives access to the exterior handle bolts, remove these and unclip the accutating rod from the handle then lift out the handle watching that the locking barrel doesnt fall!

This gives great access to replace the latch mechanism - easy to do once you get into it

 

ming

SPACE TWOT

Posts

11,977

Location

PLANIT ZOG

• Feb 6, 2012

• #5

Yes and while you have the card removed, silicone grease the window runners and cable . . . . . . .

 

Optimus Prime

Well-Known Member

Posts

5,988

Location

Garden of England

• Feb 7, 2012

• #6

you don't have to take the outer handle off. can all be done by fiddling inside the door.

(top tip from minge though)

 

B

bonnybrook

Active Member

Posts

424

• Mar 26, 2012

• #7

All done got a genuine LR part for 60 quid. About an hour to fit - main problem is getting the door handle off as it's a bit fiddly.

Nice to have remote locking again!

After the horror stories about failed locks and drilling out felt it was worth it, even if she was still working using the key.