Drive plate access cover

andya · Jun 19, 2013

Hi Chaps
I need to pick some brains, I have an oil leak which appears to be coming from the DRIVE PLATE ACCESS COVER, according to RAVE it should have 9 bolts securing it into position, mine had 5 bolts missing, to which I have replace 3, other two I'm trying to source, my main question is does this plate have a gasket behind it? and if I should remove this plate to replace the said gasket am I likely to be greeted by a lot of oil?
I know you guys out there have this knowledge, please share and I will be so grateful
The vehicle that has this issue is a 1998 vogue 50 number 5
Thanks guys
regards
Andy

sandyt · Jun 19, 2013

If it is a V8 it is dry behind it that is if you are talking about the half moon blanking panel

andya · Jun 19, 2013

Hi yes sorry it is the v8 and half moon shape, glad to hear its dry, only now need to know about the gasket or if I can use some form of silicone gasket but thanks for the quick reply

sandyt · Jun 19, 2013

Nothing at all no gasket needed it is a dust cover for the torque convertor

andya · Jun 19, 2013

Would it still weep with oil if its just a dust cover?

john-sussex · Jun 19, 2013

Should be dry, If there is oil then there is a leak, either rear main, gearbox input/ sump seal or core plug.

andya · Jun 20, 2013

Bugger

andya · Jun 20, 2013

How hard would these issues be to to fix?

sandyt · Jun 20, 2013

You need to get underneath take the plate of and see what is going on

Drive plate access cover

andya

Member

sandyt

Well-Known Member

andya

Member

sandyt

Well-Known Member

andya

Member

john-sussex

Member

andya

Member

andya

Member

sandyt

Well-Known Member

Similar threads