doriz
Well-Known Member
- Posts
- 17,312
Shot blaster and sprayer discovered 500m from my house. That opens up a few options. Wheels dropped in yesterday. Might put the roof in as well now.
Series 3 Doriz LR illness 109”
- Thread starter doriz
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I don't use a gasket sealer, but depending on the usage will coat liberally with hylomar blue e.g. the fuel sender on the MGA which some genius of an engineer thought would be perfectly placed halfway down the side of the tank rather than in the top!
doriz
Well-Known Member
- Posts
- 17,312
Jesus this durdy doosel is kicking my arse. Removed the manifolds this arvo, no seized bolts or nuts. Hardly expected it either as the engine is caked in congealed oil. Anyhoo, I notice the manifold gasket has a bit missing. The plan wasn’t to twiddle with the injun as it would be rebuild at a later date. Rocker, oil filler, sump and now the exhaust gaskets to replace and then to observe if it still leaks like a snitch. Durdy durdy doosels.
Attachments
doriz
Well-Known Member
- Posts
- 17,312
is there a battery box that fits under the bonnet ie a part number?
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
What’s wrong with it under he seat?
Early battery trays on S2 in engine bay but not always big enough for the large batteries needed for the engine crank time
doriz
Well-Known Member
- Posts
- 17,312
Battery box under seat is rotten and needs replacing. As I have the space under the bonnet I was simply scoping the possibility of housing it there. I can then put tool trays under each seat base for the same price.
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
YRM do good battery/seat base items. Even do a conversion for the middle seat to have a tray under it.
You could always make a new one under the bonnet. Make from angle iron to size to suit
doriz
Well-Known Member
- Posts
- 17,312
That’s what I was thinking.
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
Its not like you are short of space if you leave the front end alone
Put it passenger side so cable run to alternator is shorter
Where is the air filter housing?
doriz
Well-Known Member
- Posts
- 17,312
Driver side, oh and there is a defender coolant reservoir next to that which eats space.Its not like you are short of space if you leave the front end alone
Put it passenger side so cable run to alternator is shorter
Where is the air filter housing?
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
Is that not bolted to the wheel arch?
Post a photo. This could be moved.
But if you our battery on drivers side you cover up the steering box
doriz
Well-Known Member
- Posts
- 17,312
that wert injun after it got gunked. Plenty of other parts removed now to clean off the oil and access things like the starter motor, engine to chassis earth etc.
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
Looks like where the screen wash bottle is may be the best. nice short leads to alternator and starter.
Smaller wash bottle in another position?
Smaller wash bottle in another position?
doriz
Well-Known Member
- Posts
- 17,312
Aye good idea. Need to tackle the washer motor as it’s kaput so will look for an alternative spot.
As they are defender wings you could Fit the later style washer bottle in the same place that tucks under the wing sitting on the wheeL arch rather than moving.
doriz
Well-Known Member
- Posts
- 17,312
Can we bring in an umpire?
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
That are series wings…. Look by the servo. Different to defenders
doriz
Well-Known Member
- Posts
- 17,312
That’s what I thought, though was open to a challenge.
doriz
Well-Known Member
- Posts
- 17,312
Motivation is lacking,
I either a. do nothing b. go clean the en suit c. remove the stater motor, degrease it and ascertain why it’s sticking - burrits lunchtime nearly.
If I can find any motivation I think I’ll do the cleaning, cook some gyoza for lunch, starter motor, and then do nothing?
I either a. do nothing b. go clean the en suit c. remove the stater motor, degrease it and ascertain why it’s sticking - burrits lunchtime nearly.
If I can find any motivation I think I’ll do the cleaning, cook some gyoza for lunch, starter motor, and then do nothing?
Hicap phill
Well-Known Member
- Posts
- 16,238
- Location
- Wiltshire
Have something to eat & then fall asleep under the motor….just don’t wake up in a hurry
