P38A Door Lock mec
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
martyuk
Well-Known Member
- Posts
- 824
- Location
- Swindon, UK
Those microswitches are the ones I replace in any door locks I work on - for that exact reason.
In the RHF Door latches, I also upgrade the CDL switch which does the grounding for the tailgate from a 0.1A contact switch to a 5A contact switch - as I wonder if that is one of the problems over the years having the current draw of the tailgate motor go through that switch, that it burns out or at least tarnishes the contacts on that microswitch...
I haven't had the issues he had with the connector to the door latch - but as someone who does a lot of electronics, I cringed when he said he was going to tape all the wires up.... HEATSHRINK!!! if you're going to the effort of soldering them all together!
In the RHF Door latches, I also upgrade the CDL switch which does the grounding for the tailgate from a 0.1A contact switch to a 5A contact switch - as I wonder if that is one of the problems over the years having the current draw of the tailgate motor go through that switch, that it burns out or at least tarnishes the contacts on that microswitch...
I haven't had the issues he had with the connector to the door latch - but as someone who does a lot of electronics, I cringed when he said he was going to tape all the wires up.... HEATSHRINK!!! if you're going to the effort of soldering them all together!
- Posts
- 58,170
- Location
- Preston Lancs.
When i want a bit of entertainment i often watch You tube videos of people attempting repair things. Sometimes it absolutely hilarious. As they go about things totally arse about face thinking they are doing a good job. Well meaning but bloody hilarious.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I'm just glad to see Dopey is still with us. He's been so quite I thought he'd checked out!
- Posts
- 2,427
- Location
- Isle Sheppy
You should have said warmers I would have done a vid of me doing my eas a few weeks ago
- Posts
- 58,170
- Location
- Preston Lancs.
- Posts
- 2,427
- Location
- Isle Sheppy
Longest film ever made
