P38A Door handle plastic thingy

Grrrrrr · Nov 25, 2016

Front doors.
Where the cable attaches to the inside door handle it clips into a little white cylinder thing that pops through the handle itself. Mine's given up the ghost so the white thing and the cable pops out. Does anyone know what the white thing is called and if you can get a replacement? I'll try and get a photo tomorrow!

brianp38dse · Nov 26, 2016

I seam to recall wammers mentioning a rebuild kit for the handles but I may be wrong.

wammers · Nov 26, 2016

brianp38dse said:
I seam to recall wammers mentioning a rebuild kit for the handles but I may be wrong.

That kit is a little black thingy though, not a white thingy. The white thingy is part of the release cable.

brianp38dse · Nov 26, 2016

Oh well nearly got it right, I will try harder next time

wammers · Nov 26, 2016

brianp38dse said:
Oh well nearly got it right, I will try harder next time

The black thingies are STC3063 and STC3064 cam kits for the outer door handles.

Grrrrrr · Nov 26, 2016

And the white thingy?

wammers · Nov 26, 2016

Grrrrrr said:
And the white thingy?

White thingy is part of ALR6968 R/H or ALR6969 L/H.

Doo · Nov 27, 2016

Speaking of door handles, my front doors are a right mare to open when you pull on the outside handles. While on crutches, I'm finding it hard going and have to have three or four goes sometimes! The rear handles are fine.

Inside, they are good as gold!

What's the cure and is there a relief to be had by spraying liberally with silicone spray in the meanwhile?

Fanks and sorry to butt in on another thread, but it did say 'andles, but not how many

wammers · Nov 27, 2016

Doo said:
Speaking of door handles, my front doors are a right mare to open when you pull on the outside handles. While on crutches, I'm finding it hard going and have to have three or four goes sometimes! The rear handles are fine.

Inside, they are good as gold!

What's the cure and is there a relief to be had by spraying liberally with silicone spray in the meanwhile?

Fanks and sorry to butt in on another thread, but it did say 'andles, but not how many

The part numbers in post #5.

Doo · Nov 27, 2016

So the part numbers are for Land Rover dealers then....?

I take it the plastic has expanded or some such and is causing the problem, is it? Or is it rusted metal inside?

Had a similar problem on the tailgate handle of one of my other vehicles, tried to lube the pin, but it had expanded with rust and the handle stopped springing back to place. Ahh well, I suppose the are going to cost a fortune... 4K 'andles

Doo · Nov 27, 2016

I went tohttp://www.paddockspares.com/stc1219-cam-assy-door-l.html and found this STC1219

So this will fix my stiff bits yes?

wammers · Nov 27, 2016

Doo said:
I went tohttp://www.paddockspares.com/stc1219-cam-assy-door-l.html and found this STC1219

So this will fix my stiff bits yes?

Nope. Look at the part numbers in post #5

Doo · Nov 27, 2016

wammers said:
Nope. Look at the part numbers in post #5

http://www.paddockspares.com/catalogsearch/result/?q=STC3064

What am I doing wrong?

wammers · Nov 27, 2016

Doo said:
http://www.paddockspares.com/catalogsearch/result/?q=STC3064

What am I doing wrong?

Don't know maybe Paddocks don't stock them. http://www.rimmerbros.co.uk/Item--i-STC3064

Doo · Nov 27, 2016

wammers said:
Don't know maybe Paddocks don't stock them. http://www.rimmerbros.co.uk/Item--i-STC3064

Ahh, yes.. different shop!

DOH!

Thanks

Grrrrrr · Nov 27, 2016

wammers said:
White thingy is part of ALR6968 R/H or ALR6969 L/H.

Cheers.

Pity I haven't a lathe. Probably better to knock something up.

Endeleus · Dec 3, 2016

Is it this white thing? Just been clearing the garage out and found a spare handle... yours if you want it.

Grrrrrr · Dec 4, 2016

Endeleus said:
Is it this white thing? Just been clearing the garage out and found a spare handle... yours if you want it.

Bingo!

That' it. Sorry, been a bit busy so not had a chance to log on until this evening. I was just about to upload a picture. Seeing as I've transferred it to the computer I will anyway! This is mine ...

I was wondering how best to make one!

Endeleus · Dec 6, 2016

In the post to you now. I think the envelope weighed slighly more than the part!

Grrrrrr · Dec 7, 2016

Endeleus said:
In the post to you now. I think the envelope weighed slighly more than the part!

Cheers. That'll give the passenger window a rest. It is like having child locks on the passenger door!

P38A Door handle plastic thingy

Technician, Bodgit & Scarper Ltd

Well-Known Member

No longer with us, RIP

Well-Known Member

No longer with us, RIP

Technician, Bodgit & Scarper Ltd

No longer with us, RIP

Well-Known Member

No longer with us, RIP

Well-Known Member

Well-Known Member

No longer with us, RIP

Well-Known Member

No longer with us, RIP

Well-Known Member

Technician, Bodgit & Scarper Ltd

Active Member

Attachments

Technician, Bodgit & Scarper Ltd

Active Member

Technician, Bodgit & Scarper Ltd

Similar threads