Does anybody know the size of the rocker cover bolts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Simon inskip

Member
Posts
27
Location
Wakefield
My "mate" has just overtightened and snapped the near rocker cover bolt on my 300tdi. It's snapped just below the bolt ie when bolt is removed the bar fills approx 95%
Can anybody suggest a repair!!??
Thanks in advance
 
you need top undo the cyclone 8mm socket ,hose clip on breather pipe, screw driver or 6mm socket, then just remove the 3 or in your case 2 rocker cover nuts, if you lock 2 m8 nuts together you can just nip new stud up then remove and use the proper flange nut to secure rocker shaft,once done smear some silicone sealant around cyclone o ring before refitting it
 
Last edited:
You must log in or register to reply here.

Similar threads

chrubb
300tdi Bosch injector pump head scratcher
Replies
4
Views
1K
chrubb
chrubb
dag019
Fitting a Husky Winch
Replies
8
Views
620
dag019
dag019
J
Defender 300 Tdi Engine Swap
Replies
4
Views
866
jer_300Tdi_90
J
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
362
xDParis64
xDParis64
ChrisBduck
3.6L Land rover 90
Replies
2
Views
795
ChrisBduck
ChrisBduck
Back
Top