DIY diff locker!!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
If you read through far enough the bloke confesses to it being a wind up (no pun intended)
Bloody good joke and totally believable.
 
oxides said:
If you read through far enough the bloke confesses to it being a wind up (no pun intended)
Bloody good joke and totally believable.
Click to expand...
:D

You know, its when I re looked at the picture,
I noticed it was welded on the bench,
being held up one end by "bits"
with no hope of ever going back into a diff case,
its then it gives the game away eh?
:doh:
Indeed, a very good post by big ginger,
even better post by the joker in question....:D
 
jamesmartin said:
not entirly as if welded square woud fit back as diff carrier is held by caps
Click to expand...
I know what your saying james m,
but the chances of getting it spot bollock right is very slim mate, more so as its not clamped, it`ll move a bit after welding anyway?
another point is, why take it out of a diff case just to weld it, you`d only do that to renew bearings,
and you`d never do that then weld it up eh..
orf subject slightly,
when i once raced mini`s on a tight budget, a mate of mine "done" a mini diff for me to try..
he doubled the endfloat washer/bushes on the 4 planet gears,
by all acounts a right bar steward to refit as they were over tight, but gave the impression of a locked diff, but would "let go" when under a lot of pressure.
(instead of breaking the drive shafts!)
I never really liked locked diffs on front wheel drive so took it out after a few races though, as I used a dab of left foot braking when racing on the small ovals..:blabla:
 
My old one. I now its an old tread.
 

Attachments

  • Søndag 017.JPG
    Søndag 017.JPG
    310.4 KB · Views: 221
Its the taking part that counts
Least he had a go .failed miserably mind but he tried .bet he will never make that mistake again lol
 
dandit1200 said:
Carefull you might upset ppl for reading a thread .for using the site for what its for an information source and to try to connect with ppl ......I csll um key board warrior's usless bullies hiding behimd a screen ...
Click to expand...
And now you are being an oversensitive stroppy twunt. So many awards in one day! Well done madam.
 
You must log in or register to reply here.

Similar threads

Arctic2
Freelander 2 (LR2) Engine oil Change MY 2007
Replies
14
Views
2K
Arctic2
Arctic2
C
Defender TDCi Puma 90 - Diff Lock Light
Replies
12
Views
607
crashmat
C
N
Rear diff issues
Replies
5
Views
777
niko-h
N
Arctic2
Freelander 2 2.2 diesel diff oil
Replies
8
Views
2K
Arctic2
Arctic2
ned_
Fog vs spot lights, which is best for the forest?
Replies
8
Views
1K
KISSMYAURA
KISSMYAURA
Back
Top