Have any of you replaced the chassis on a discovery 2 TD5 and what the costs were? I see the chassis are around £3500, just wondered if it was worth it if the rest of the truck is okay? Have any of you used a company that has undertook this work and the costs?. would love to do it myself but don't probably have the kit to do it. thanks in advance.
Discovery D2 TD5 Galvanised Chassis replacement costs?
- Thread starter Cawdordon
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
General consensus, is a good investment! So long as your able to look after the the bodywork! It will prolong the life of the car
As for doing it yourself? I would say go for it! You will learn a lot about the car! And how it's put together! Just make sure you have the room to do it! (There are a few videos of owners doing a chassis swap! In garage and outside their house!).
I'm looking at about 2 years time do mine!!??
Kev
Ps: have another 'runaround' whilst doing the swap!
As for doing it yourself? I would say go for it! You will learn a lot about the car! And how it's put together! Just make sure you have the room to do it! (There are a few videos of owners doing a chassis swap! In garage and outside their house!).
I'm looking at about 2 years time do mine!!??
Kev
Ps: have another 'runaround' whilst doing the swap!
Kenbo
Active Member
- Posts
- 203
- Location
- Coleraine, Northern Ireland.
Make sure the rest of the bodywork is sound, floors, inner wings, bulkhead, etc.
- Posts
- 6,395
- Location
- North Perthshire
Just remember....you have to lift the body a lot higher than you might think, to get the old chassis clear and the new one in place. Can be scary!!
hughdavies
Well-Known Member
- Posts
- 1,475
- Location
- Western Brecon Beacons mynudd du.
If your doing it you might as well do it right and do everything that needs doing. This was Cambrian 4x4 Lampeter 2019, I supplied fully recon suspention bits for them to fit, fpr and a few other bits that are far easier to change with the body off. You will not have much change from £10,000 at todays prices.
.
.
Good Heads Up informationIf your doing it you might as well do it right and do everything that needs doing. This was Cambrian 4x4 Lampeter 2019, I supplied fully recon suspention bits for them to fit, fpr and a few other bits that are far easier to change with the body off. You will not have much change from £10,000 at todays prices.
.
Kev
Bas_on_a_mission
Member
- Posts
- 15
- Location
- Doncaster
I’ve just bought a Maer chassis for my D2. Went for the premium kit with the cross members, front shock towers and bolt kit. All in: £2554 delivered by a nice chap from Poland!
