Discovery 1 immobaliser

Is there any way around the immobiliser on a disco 1 300tdi
Has just the green box under the glove box
Has linked the orange and black wire. The engine turns over but won’t activate the pump
Have put power to stop solenoid but still now life
Any advice please

Daffin said:

Is there any way around the immobiliser on a disco 1 300tdi
Has just the green box under the glove box
Has linked the orange and black wire. The engine turns over but won’t activate the pump
Have put power to stop solenoid but still now life
Any advice please

Click to expand...

Auto or manual?

This may help

Not, if as the OPs states in his first post they have a automatic 300Tdi.

Anyway, theres a lot easier way, without stripping the dash down to access the spider, and then still retaining the vehicles immobiliser security.

Seems that it's just another post for the same issue https://www.landyzone.co.uk/land-rover/discovery-1-300tdi-immobiliser.395564/ and as it's automatic it doesnt have a spider(that's for manuals) but "Electronic/EDC immobilisation" which can't be "hacked" by joining wires so quit doing this cos you can only make it worst, this one works with a security code otherwise it inhibits the EDC ECU which manages the injection timing... the only way to remobilise it is with a working fob, EKA code and fixing the system to faultless status or it can be set to be disarmed with key with a dedicated diagnostic tool..., see about the EDC immobilisation here https://blackbox-solutions.com/help/SM031.html

eventually try this: https://www.technozen-electronics.co.uk/land-rover-10as-alarm-ecu-services/