Discovery 1 fuel tank guard fitting question
- Thread starter Mark L
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
When you guys fitted these tank guards did you take out the old tank holder and fit the guard or fit it over the top
Festerer
New Member
- Posts
- 254
- Location
- Sedgley Westmidlands
Fitted over the top m8 , once the plough is removed , its a 20 min job to fit
The rear most mount hole line up with nothing at all , just ignor them , the guard cannot drop as its mounted to chassis at the bumper and the middle .
I fit brand new 10.8 bolts ( dad runs a fixings factory ) so cheap
Two people is a must to hold it safely and line it up .
Mine has a removable tow eye attachment with built in jack point,and a multi position standard tow ball attachment .
The rear most mount hole line up with nothing at all , just ignor them , the guard cannot drop as its mounted to chassis at the bumper and the middle .
I fit brand new 10.8 bolts ( dad runs a fixings factory ) so cheap
Two people is a must to hold it safely and line it up .
Mine has a removable tow eye attachment with built in jack point,and a multi position standard tow ball attachment .
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
So fit new bolta.fron and rear of tank then
haigy
Well-Known Member
- Posts
- 1,277
- Location
- Crewe cheshire
Looking at the bolts at front of tank do they go thru xhassis then put a nut on or do i need 2 keep the frame
Similar threads
