Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
As per the title - a fully custom built, expedition roof rack.
Spec is as follows:
Powder coated steel tubing frame.
Fully chequer plated base.
Spare wheel locator with 2x lashing points.
Sand ladder brackets.
2x jerry can mounting point with anti-theft bar and ratchet strap.
Tool box mounting point. (See 4 holes to front left of 2nd pic)
Chequer plate wind deflector with number plate mounting. (Can easily be removed if not required)
8x roof gutter mounting points.
The only thing this rack need is light mounting points. Possibly even a CB aerial mount.
There is a patch approx 2 inches long where the powder coating has been chipped off.
Please note; this thing is HEAVY. It will require 4 people to transfer this from my vehicle to another, so please turn up with a mate. I'll make sure there's 2 of us this end.
I'd like £475.
Strictly collection only from Tamworth, Staffs.
Spec is as follows:
Powder coated steel tubing frame.
Fully chequer plated base.
Spare wheel locator with 2x lashing points.
Sand ladder brackets.
2x jerry can mounting point with anti-theft bar and ratchet strap.
Tool box mounting point. (See 4 holes to front left of 2nd pic)
Chequer plate wind deflector with number plate mounting. (Can easily be removed if not required)
8x roof gutter mounting points.
The only thing this rack need is light mounting points. Possibly even a CB aerial mount.
There is a patch approx 2 inches long where the powder coating has been chipped off.
Please note; this thing is HEAVY. It will require 4 people to transfer this from my vehicle to another, so please turn up with a mate. I'll make sure there's 2 of us this end.
I'd like £475.
Strictly collection only from Tamworth, Staffs.
