IamRobbie
Well-Known Member
- Posts
- 2,800
- Location
- Derbyshire, j28 M1
looking good!
Disco Tray back build
- Thread starter discomark10
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Cheers Robbie, its very slowly getting there!
back on all 4's
Just gota get the axle centered by adjusting the upper arms, then I can weld the lower chassis mount on as they are clamped atm.
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Watch this space markwill put a photo up soon hopefully try and max the shocks out, worked out what was holding up the back axle in this photo, turned out it wasn't the A frame after all but I'm sure the x-eng joint will work fine!
Nice, what was holding it back?
Jointed trailing arms where they are mounted on the chassis, when sitting level the arms are slightly tilted so when on flex they bind up, got new mounts sent out and hopefully have them next few days, then see if can max them shocks out haha
Zoom in on the photo you'll see the arm isn't mounted level.
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Jointed trailing arms where they are mounted on the chassis, when sitting level the arms are slightly tilted so when on flex they bind up, got new mounts sent out and hopefully have them next few days, then see if can max them shocks out haha
Zoom in on the photo you'll see the arm isn't mounted level.
Ah yea I see, thats a Pain, where are they from?
how you finding the shocks btw?
Similar threads
