Disco Tray back build

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Doh forgot you have later axles. I have a genuine LR 4 pin diff centre from a 4.6 if its anygood to you will need putting into a case. Think its 18mm cross pins.
 
I think if I replaced the diff's, it'l be with a lsd. I've gone over the options and for me I believe it would be the best option.
but cheers anyway
 
20131108_171849_zps3df86c62.jpg

Made a clam on platform for the swirl pot
 
Got my swirl pot in and plumbed in along with the new pot feed pump wired in and mounted.
gave it a 2min tester and seems to drive fine now! must of been an air lock in the fuel from running a lil low (was only say 1/4).
Ill sort out a few pics once when I put in the new rad.
 
Well, she's still running great with the new regulator and the swirl pot.
had a run up the local lanes for 20min to give it a good test as I'm to desperately skint and busy to go P&P today :(

Bolted down a metal filling box lined with foam as my new tool box, nice n safe if I roll, and also strapped in a small sub :)

Hope to have the new rad in tomorrow and hopefully the arches!
 
So the gf and I took part in a punch challenge with the new club... ended up coming 3rd!
We also had a bit of a play session after, it was good fun! Made it up a muddy hill a couple times that only 1 other managed to get up... and thats people with lockers lol.
Only annoying thing is the sd card that I recorded on all day is knackered :mad:
 
Back
Top