Disco 2 Gear select bush etc

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

Russell Marlow

Member
Posts
33
Location
Surrey
I had a shocking drive home with a trailer on Monday when the gearstick (manual) decided to baulk on nearly every gear.....stripped and it is the plastic bush on the link that the lever ball locates in broken and dropped in a bit causing obstructions.
Firstly what is it called so I can locate a new one.
Second is it a push fit or should there be a circlip somewhere?
I was due to change the gearbox oils and all other fluids but I notice the MTF in the gearbox is a bit creamy like it has water....is that normal? condensation in the box perhaps that then emulsifies in the oil. Thanks in advance. It is not a Wading off roader so its not taken water from swimming!
 
I have answered my own question, found the part and also that it should have a circlip which has evidently dropped into the gearbox......hopefully laying in the bottom causing no issue!

New bush and clip ordered.
 
Russell Marlow said:
I have answered my own question, found the part and also that it should have a circlip which has evidently dropped into the gearbox......hopefully laying in the bottom causing no issue!

New bush and clip ordered.
Click to expand...
Hopefully you find the clip when you drain the gearbox !! Have a good look in there when you change the selector just in case it’s visible from there.
 
Instead of just draining the oil, why not take the sump off?
It'll give you a chance to clean it and with luck you'll see the circlip (or bits of it) stuck on the magnet.)

(Having an auto I don't know if it has a magnet, but it flipping well should unless they rely on a magnet on the sump plug.

If you don't see it there you could then turn all the gears slowly until you hopefully see it!
meego said:
Have a good look in there when you change the selector
Click to expand...
He's only changing the bush, praps that's what you meant!
 
looking zt gearbox shape I really think it would just end up in the bottom out the way, I feel sure it must be common anjd there are many in the bottom of gearboxes...the clip can only drop in if that plastic bushing fails!
 
Stanleysteamer said:
Instead of just draining the oil, why not take the sump off?
It'll give you a chance to clean it and with luck you'll see the circlip (or bits of it) stuck on the magnet.)

(Having an auto I don't know if it has a magnet, but it flipping well should unless they rely on a magnet on the sump plug.

If you don't see it there you could then turn all the gears slowly until you hopefully see it!

He's only changing the bush, praps that's what you meant!
Click to expand...
No sump. I know it’s only the bush. My gear change stiffens up on longer journeys and that’s caused by the bush and wear. I’ve not done mine yet, but have watched how it’s done. You can see into the gearing from memory when the old bush is removed, hence why i said to have a look at the point of the strip down for doing the bush !!
 
You're not the first it's happened to :)
I never found the missing circlip on mine & it's had a few oil changes since it fell in.
Fortunately it's never caused any problems.
 
You must log in or register to reply here.

Similar threads

B
TD5 R380 gearbox selector bush
Replies
1
Views
508
Landmark2
Landmark2
B
Disco2 TD5 Can only select one gear
Replies
8
Views
903
Bugz
B
S
end float on bronze bush
Replies
2
Views
589
tottot
tottot
F
Freelander 1 TD4 Manual 1st Gear Switch
Replies
3
Views
347
freelounger
F
M
Freelander 2
Replies
3
Views
327
Arctic2
Arctic2
Back
Top