FlyingPete
Well-Known Member
- Posts
- 1,305
- Location
- Coventry
I have a 1998 Disco 1 and the front fog lamps have fallen to bits- they're the ones which are set into the lower part of the bumper not bolted to it. Looking for a replacement set.
Wanted Disco 1 front fog lights
- Thread starter FlyingPete
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tetsu0san
Active Member
- Posts
- 583
- Location
- Oxfordshire
Is it the just the lights themselves you want or the metal frame too?
FlyingPete
Well-Known Member
- Posts
- 1,305
- Location
- Coventry
The frames are in surprisingly good shape given the state of the lights. So should be able to salvage them.
tetsu0san
Active Member
- Posts
- 583
- Location
- Oxfordshire
I have a feeling I have one light. The other decided it no longer wanted to be waterproof and that was the end of that.
I'll check later today.
I'll check later today.
tetsu0san
Active Member
- Posts
- 583
- Location
- Oxfordshire
Is the plastic case on the back meant to be attached to the light itself or do then just kind of sit in it?
FlyingPete
Well-Known Member
- Posts
- 1,305
- Location
- Coventry
On both of mine the glass front has detached from the back case, and the incoming water/dirt/general road crud has basically dissolved the innards. I think they're supposed to be joined in a (theoretically) watertight manner.
I was also considering just removing the lamps and filling the space with some suitably similar DRLs instead.
I was also considering just removing the lamps and filling the space with some suitably similar DRLs instead.
tetsu0san
Active Member
- Posts
- 583
- Location
- Oxfordshire
Mine have done the same. Probably no good really.
Similar threads
