Dipstick hitting crankshaft

109party · Sep 9, 2009

right well its the correct dipstick, well i guess. Took the dipstick out of my other landy another 2.25 petrol, and it still hit the crankshaft, it doesn't hit in my other landy, so how easy would it be for the shaft of the dipstick to be forced further in. what you guys and girls recon im scraching my head but thats all i can think of, unless its a different crank? 5 bearing ? how can i check

Jackual_NZ · Sep 9, 2009

Are you sure its hitting the crankshaft and not the baffle in the oil pan?, try moving the dipstick tube around, till the dipstick will slide in to the sump.

109party · Sep 9, 2009

positive you cna hear it knoking on the crankshaft with each rotation and yer, its definatly the crankshaft, when it slides in thats when you can hear it smashing and grinding on the shaft

steve2286w · Sep 9, 2009

whip the sump off and see whats goiung on

spongebobsquaretruck · Sep 10, 2009

have you tried measuring the length of the dipstick tube compared to your other landy? not 100% sure on dipstick tubes but if it fits on one and not the other can be the only difference really. are the dipstick tubes a push in fit?

Jackual_NZ · Sep 10, 2009

Agreeing with steve2286w...Yark that sump out...

109party · Sep 10, 2009

yer gonna drain it and whip the sump off this evening, thats the thing sponge, they are the same length thats whats weird. so yer sump off this evening

jai_landrover · Sep 10, 2009

dip stick tubes do get pushed in you need to measure length of tube from block to top of tube on both vehicles. i bet its either broken off and then been pushed in or just pushed in. this means ur oil level is also too low.

109party · Sep 10, 2009

jai, its the same length as the other one, and that doesnt hit the crankshaft ?

dr pepper · Sep 11, 2009

Have yer gone over a bloody big rock and tw-$ted your sump, and got a dish in it, so catching the bottom of the dipstick, happened to me once before, on a car.

109party · Sep 11, 2009

nope, took off sump to day no dish

dipsticks same length, no evendence of tube pushed in, so what the hell could be wrong anyone no if there is a different crank other than the 5 bearing or 3bearing , what does it look like,

spongebobsquaretruck · Sep 11, 2009

hello

just a thought? is there a difference in the sump on a 3 and 5 bearing engine? maybe wrong one fitted?

90truckcab · Sep 11, 2009

no difference in sumps no, the 5 & 3 bearing are obvious to tell apart

i had to shortern a new one this time on my 2.25 petrol and swap the fittings over,

how bent is the tube? and why does it hit the crank, bend it the other way ???

Dipstick hitting crankshaft

109party

Well-Known Member

Jackual_NZ

New Member

109party

Well-Known Member

steve2286w

Well-Known Member

spongebobsquaretruck

New Member

Jackual_NZ

New Member

109party

Well-Known Member

jai_landrover

Well-Known Member

109party

Well-Known Member

dr pepper

New Member

109party

Well-Known Member

spongebobsquaretruck

New Member

90truckcab

Well-Known Member

Similar threads