Disco 2 Diagnostic Tool Options

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery said:
the Volkswagen Auto Group has nothing to do with this thread IMO
Click to expand...

Then you have not been paying attention. I quoted post #24 following on from post #20 in which interceptorby discusses taking his vehicle to be diagnosed by an "on-site VAG garage" who were unable to connect. He did not know if this was due to incorrect protocols or a defective socket and asked if anyone had experienced dodgy connections. IMO it was most likely due to incorrect protocols as they are a VAG specialist and unlikely to hold diagnostic equipment suitable for a TD5. The reference was therefore relevant to the thread and I claim my £5. :p
 
boptah said:
....i can't find any info on the Vident iLink 400. It looks to be more powerful than the Foxwell but cheaper.
Click to expand...
So if you couldnt find any info about it how do you know it's more powerfull than Foxwell ? :confused: ... looks very like the Icarsoft and that one sucks with td5
 
sierrafery said:
So if you couldnt find any info about it how do you know it's more powerfull than Foxwell ? :confused: ... looks very like the Icarsoft and that one sucks with td5
Click to expand...
I emailed the Australian distributor and he told me it does the TD5. I think it uses the same software as the Foxwell NT530 but has access to coding options. It is also manufacturer specific unless you pay extra for more to be added. I do not think the Foxwell can code.
 
Correct. The Foxwell doesn’t code. Get a Nanocom for coding.
So... Take the plunge, buy the vident iLink 400, try it out vigorously for a month and report back on the forum how it worked out with your TD5.
 
boptah said:
I emailed the Australian distributor and he told me it does the TD5.
Click to expand...
Why did you ask an australian distributor for a tool made in China though? ... The Icarsoft was advertised to do the Td5 as well and it was a bad joke with it... If you trust this Vident tool go for it and tell us how it works cos if in reality it does what Foxwell can(or even more) then it's a good choice
 
sierrafery said:
Why did you ask an australian distributor for a tool made in China though? ... The Icarsoft was advertised to do the Td5 as well and it was a bad joke with it... If you trust this Vident tool go for it and tell us how it works cos if in reality it does what Foxwell can(or even more) then it's a good choice
Click to expand...
The AU dealer did a youtube video on it for the Freelander. I was just wondering if anyone else has had any experience with it before i committed a £100 . There is amazingly little info . I probably will buy it because i am more curious than i am miserly. Unless anyone can shed some more light on it?. thyis is the land rover function list from their website. http://www.videntshop.com/upload/service/19102315718205261378.pdf
 
Last edited:
The special function list for D2 is 100% similar with Foxwell, \this Vident seems a cheaper version of it
 

Attachments

  • Foxwell NT510_Landrover_Functionlist-V1.00.pdf
    1.9 MB · Views: 172
Hope for the best for you seeing as how it is taking ages to get stuff from China at the moment, as we have found out!
Lucky thing your MOT is a while off!
 
It's arrived and i have cleared the 3 Amigos. It diagnosed a left front wheel bearing sensor . Which is probably correct. Don't know what else it does yet. But i am sure it will pay for itself. . It now lives in the glovebox.
 
You must log in or register to reply here.

Similar threads

M
Disco 2 My disco2 leans to the right
Replies
7
Views
2K
Henry_b
Henry_b
E
Turbo upgrade & re-map
Replies
10
Views
2K
MJI
MJI
B
OBD 2 Compliant Fault Code Readers
2
Replies
21
Views
3K
Stanleysteamer
Stanleysteamer
tweedandbriar
Low Rev Throttle Response, at a loss now!
10 11 12
Replies
235
Views
11K
Tim4x4
Tim4x4
B
Smart Key Issue - Disco 4
Replies
0
Views
1K
BourneFree
B
Back
Top