Coffeelandy
Well-Known Member
- Posts
- 2,297
- Location
- SE Cornwall (forgotten part!)
A pleasure to be of rare assistance on here I'm normally the bloke asking for help.Such a helpful thread
A pleasure to be of rare assistance on here I'm normally the bloke asking for help.Such a helpful thread
Wonder how tough to fit these in a classic 95
Me too! I bought switches and haven't got around to it yet. My seat movement works perfectly so the heaters should do. I'll hook them up first to test them before making holes in the dash for switches.really must get round to wiring the heated part of my seats!! not sure it would end up working though!
Might look for a set soon at a pull apart and try it outCan't be that difficult, more room than in a Defender.
At that's what I'm hoping when I get round to putting my set in my Disco.
There's a place in Plymouth where I got mine from that solely break MX8 s I'll try and get the number Mate.Might look for a set soon at a pull apart and try it out
Brill. I've got the leather electric ones same shape though. Transforms the drive as you're held in place rather than rolling around.
Do you know If those back seats will fit into a 110CSW? If I could have his number that would be lovely please?I'll PM you the number of the bloke I got mine from, he breaks RX8s solely and has loads and can get more. I paid £100 for mine including the 2 rears which you can sell on.
No they won't just drop in as the front ones do. You'd need to build a frame for them from scratch but even then I think they're so low slung they just wouldn't work.Do you know If those back seats will fit into a 110CSW? If I could have his number that would be lovely please?
I think it will. I have a cubby box there instead but there is plenty ty of space either side. You'd need to ask if anybody has done it on here for a fefinitve answer.Planning on doing this in the coming months.
Will a middle seat with seat belts still fit?
Not enough room Mate.Has anybody done this with a middle seat yet? Any chance you could post some photos?
Great post this, just got some RX8 seats so planning how to go ahead and fit/wire them up.Here you go Mate try and expose some wire and use this guide below to work out which is which. One thing I did suss out with these seats is that they go so far forward that you don't need to remove the seat base to access the boxes beneath for battery and jack etc.
Seat Motion
Grey - +12v
Purple - Ground
Lumbar
Yellow w/red stripe - +12v
White w/yellow stripe Ground
Seat Heater
Blue - +12v
Passenger seat
Seat heater
Red +12v
Black - ground
Heated seats work, 12v is 12v, just have a on off switch in line so they do not burn out
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!