Jaswilliams
Active Member
- Posts
- 260
- Location
- zummerzet
Damn it:
Easy enough to replace the injector loom.
Defenders
- Thread starter BronkoMini
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Easy enough to replace the injector loom.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Yeah doesnt look too hard, I'm also going to replace the injector seals/washers as well.
bankz5152
Well-Known Member
- Posts
- 9,311
- Location
- South London/North Kent
Easy to do, may be worth changing the rocker cover gasket while your at it. Remember not to do the bolts up too tight and buy a few spare bolts incase one sheers off.
Clean the red plug and the other end with some brake cleaner, let it dry fully before clipping it back in.
Clean the red plug and the other end with some brake cleaner, let it dry fully before clipping it back in.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Oh yeah I'll replace the gasket as well and good point about getting some spare bolts.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
So today I took off all of the checker plate, I'm going to give it a key then put on some etch primer then spray on the black upol raptor paint, should make it look much better:
The paint underneath the plate is a way better condition than I thought it would be.
The paint underneath the plate is a way better condition than I thought it would be.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Because I'm a mug and didnt want to spend £5 on postage I bought a k&n air filter to take my order total to £50 to get free postage.
Now having looked on the net, it's seems that these air filters Bugger up you engine for no power gain. Sugar
Now having looked on the net, it's seems that these air filters Bugger up you engine for no power gain. Sugar
- Posts
- 10,372
- Location
- A bit sarf of Dorking
I don't think that they'll damage your engine, but if the manufacturers who invest hundreds of millions in engine design could get any benefit from a change of paper.....
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Apparently they let dust though, so the bores get damaged, and also the oil on the filter gets on to the maf sensor causing problems.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
So I fitted the new injector loom today, there was oil leaking out of the rocker cover gasket so I replaced that. Went to start it and it started well, and it seemed ok when I went for a drive, raptor arrived in the post so I'm going to attempt to spray the checker tomorrow.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Nice and black:
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Nice sticker eh?
Black looks so much better!
Gonna give her a clean and polish and take her to a beauty spot and get some pics with the new camera bought.
Black looks so much better!
Gonna give her a clean and polish and take her to a beauty spot and get some pics with the new camera bought.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Hmm, I need to practice my photography:
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Thanks.
cowasaki
Well-Known Member
- Posts
- 1,517
- Location
- North West England
Whats the coverage like on the Raptor paint and what did you apply it with? Thinking of using it on my bumper, roll bar, side skirts and possibly axles.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
I used an underseal spray gun, coverage is nice and even.
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
So I smashed the diff of the mini van at santapod;
so used milly to get it to the garage.
so used milly to get it to the garage.
- Posts
- 10,372
- Location
- A bit sarf of Dorking
Damn. But at least you had backup.
Here is Rosie my new to me defender td5
very nice love the colourHere is Rosie my new to me defender td5
BronkoMini
Active Member
- Posts
- 337
- Location
- Wiltshire
Managed to get the AA to get us home, called out at 1630, home at 0000, but the garage wasn't open that's why we had to take it ourself. Now for the expensive garage bill.
