Defender TD5 Spare Fob Programming with Nanocom

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bankz5152

bankz5152

Well-Known Member
Posts
9,311
Location
South London/North Kent
Have had a search around but everything i've read just says it can be done not how.

I've only got the one fob and could really do with a spare. How do I go about programming a new fob with a Nanocom Evo?

Thanks.
 
Easy. But you have to make sure you get the right fob (I got the wrong one to start). Mine finally worked with a 3TXD (and 17TN) that I got from eBay. Initially, I got a 3TXA and that didn't work (so on a side note, if anybody wants to buy a 3XTA fob, let me know...). Also, check the PCB inside is stamped with the right model (I also bought another that had one model number on the external plastic casing but the board inside was different).

- Go to AS10 module on nanocom
- Then Utility (on second page)
- I did an RF test to make sure it worked first
- Then do PIP LEARN and press your buttons (I think it tells you what to do)

However, again by finding out the hard way, I also had to set other settings in the AS10 right first (PLIP IMMOBILISE and ARM ON LOCK in settings etc.)

That's how I got mine working anyhow, good luck....fairly simple process
 
bankz5152 said:
Lying bastid! Lucas 17TN on the case 3TXD on the chip! Thanks :D
Click to expand...

Ha. Maybe they are one in the same, who knows! Either of those should work with yours though :)

I think theres sometimes a difference when people buy/sell on eBay and chop and change putting new buttons and cases on etc..
 
Done! :D super simple process.

Just have to keep pressing one of the buttons until the horn sounds or the hazards flash. Then straight after do the other fob.

Glad I finally have a spare!
 
bankz5152 said:
Seems that way! £13.99 inc delivery not bad i dont think!
Click to expand...
That seems like a good price, where did you get it?
I was looking to try and find a different key fob maybe one with a key blade built in like the BMW or Audi. The standard one I have drives me nuts because the buttons are so easy to press accidentally when you hold the keys in your hand, so many times I open the door jump in, then the doors lock and the alarm starts blaring out, neighbors just smile but you can see what they are thinking.
 
raywin said:
That seems like a good price, where did you get it?
I was looking to try and find a different key fob maybe one with a key blade built in like the BMW or Audi. The standard one I have drives me nuts because the buttons are so easy to press accidentally when you hold the keys in your hand, so many times I open the door jump in, then the doors lock and the alarm starts blaring out, neighbors just smile but you can see what they are thinking.
Click to expand...

Ha, I have the same problem.

I paid £8.99 for a spare, I think I 'made an offer' with this guy but doesn't look like he does that anymore. There is a 17TN on there for £12.99 http://www.ebay.co.uk/usr/bobtheman2014?_trksid=p2057872.m2749.l2754
 
You must log in or register to reply here.

Similar threads

M
Disco 2 New Fob Required..?
Replies
12
Views
1K
Anaconda
A
L
Steering lock / alarm problem
Replies
1
Views
470
bankz5152
bankz5152
Datatek
P38 FOB update.
Replies
0
Views
511
Datatek
Datatek
Charlot
FOB problems.
Replies
2
Views
668
Charlot
Charlot
N
Defender TD5 - crank bit won’t start
2
Replies
21
Views
1K
sierrafery
sierrafery
Back
Top