For Sale Defender/Series Garage Clear Out

Garage clearout of parts due to house move, anything that does not sell here will go on ebay, and the free section at the bottom will go to the tip. Open to offers on all items, collection prefered from Warwick area or forum relay, but can package and post at cost.

£50 - Pair of original 110 front brake calipers


£50 - Complete defender handbrake mechanism for rod actuuated handbrake. Shortly before removal the expander and adjuster and shoes were replaced. Removed when I fitted an X-Brake conversion.


£50 - Pair of galvanised military rear bumperettes for a Series


£40 - 110 towbar to fit pre-td5 crossmember (no bolts) (have same on my 110 can show pics of fitted if required)


£40 - complete airbox


£30 - Brand new Trailing arm to chassis polybush set


£25 - New Defender 90/discovery/range rover stainless rear brake piston x4 (bought the wrong ones for my 110)


Sold - +5" rear shock mounts for pin shocks


£20 - heater fan control switch


£15 - Side Step


£15 - longer style vent tops


£15 - Towing drop plate


£10 - braided extended brake pipe


£5 - Brand new rubber vent seal x2


£10 - Defedner dash Tray


SOLD - Pair Hella twin tone horns (replaced with air horn)


£10 - Towing/lashing eye and bolts x4


£5 - "new" Steering column UJ, test fitted only


£5 - Brand new Radius arm to chassis Polybush set


All below:
Free to collect or postage at cost before go to the tip

brand new lower rear door seal x2


Plastic snorkel wing mount


Bonnet prop


SOLD - Series rear veiw mirror


Misc parts any or all (lock no longer has bolts)

Could you please check for me what is the distance ( between centers) of the 110 front brake caliper mounting holes.
Thanks

cherryville said:

Could you please check for me what is the distance ( between centers) of the 110 front brake caliper mounting holes.
Thanks

Click to expand...

I will get that measured and let you know. If it helps they were removed from front axle of my '89 110 after I fitted a pair I had refurbed with stainless pistons.

Will happily take the twin tone horn off your hands if you want to PM me postage cost etc (UK mainland).

And the ball hitch covers and tow bar socket bracket from the misc box if you'd be so kind.

Roaming Wombat said:

Will happily take the twin tone horn off your hands if you want to PM me postage cost etc (UK mainland).

And the ball hitch covers and tow bar socket bracket from the misc box if you'd be so kind.

Click to expand...

pm'ed

I take the Series rear view please, post I'm afraid.

blue beasty said:

I take the Series rear view please, post I'm afraid.

Click to expand...

pm'ed

cherryville said:

Could you please check for me what is the distance ( between centers) of the 110 front brake caliper mounting holes.
Thanks

Click to expand...

Sorry for the delay. They look to be 90mm if that helps.

Many thanks. That equates to a tad over 3.5 inches while the caliper carrier on my kit project has 3 inch centers.
Shall have to keep up the search for a 4 pot caliper to suit.
Cheers.

Open to offers on all parts.

bump