Defender & Other bits,

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MaxyMan

Well-Known Member
Posts
2,540
Location
Hampshire
- 48spline Land Rover steering wheel for the TD5, 300tdi models or the very last of the 200tdi's £20? SOLD


- full pod filter intake set up brand new everything needed, includes filter, 2x1m lengths of snorkel pipe, 1x T peice to attach cyclone engine breather to, and all hose clamps. Can be connected straight to turbo intake as it's got the pod filter, makes a nice deep intake sound had one on challenge truck. Owes me £60 baught everything about 2 months ago. - SOLD


- 5point quick release race harness £20


- defender 1 peice speedo cable and clip to attach to transfer box all works fine, removed as fitted td5 speedo £5? SOLD


- defender dash & instruments & warning pannel. All works correct. Millage is on 197k. Removed to fit td5 dash. £20


- defender handbreak lever £10?


- Arb air compressor, front & rear locker carling switches. One of the carling switches doesn't work but is ideal if you just want the covers off the front of the switches for whatever reason. £20 SOLD.


- RAC parts rear propshaft slider/ diff gaurd. Powder coating is peeling away but I can tidy IT up and re paint it if wanted. £20


- 2 x small cb whips, one is yellow, one is black. Both could do with a paint.
- 1 x large cb whip, in yellow.
Offers?

Everything can be posted,
Small items would be £5 area where as the larger items eg, dash, steering wheel, snorkel kit would be £8-£10 area.
Any questions ask.
Will have a load more stuff when I get 5mins to go through all my other spares.
Cheers.
 
Last edited:
Speedo cable should fit all the models up to td5 as far as I'm aware, so 12j, 19j, 200tdi, 300tdi.
Added prices on now mate.
 
Last edited:
Yes it would fit anything, all depends how you plan to mount it. Using the factory air box or straight from turbo intake etc?
 
I want to keep in all water tight. Wondered if it would fit inside the factory air box. Sorry for the questions just unsure of the set up this.
 
Air box you can never get it 100% watertight and you wouldn't get the intake roar you'd get with straight off the turbo intake.
I run it from the turbo through the first section of hose to the T peice, then the engine breather plumbs in and then run the second section from the T peice up out the bonnet/ wing to the pod filter.
This intake removes the factory air box giving the air intake roar you often hear from challenge trucks.


Then ideally get a cover to go over the filter to protect it from the elements. These covers are usually about £10-£20 on eBay.
 
Back
Top