Defender Engine conversion

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J6BXR

J6BXR

Member
Posts
78
Hi all and happy New Year .........looking for some advice please

I currently have a 200 tdi defender 90 and also a rotten disco 1 V8 manual with a superb engine and box. I wish to transfer engine and box from Disco into defender can may i have some advice on how to go about this and what is interchangeable .Also with regard to engine mounts are there bolt on mounts available ?

any info greatly appreciated.

Best regards
 
I'm currently converting a 300tdi defender into a v8 -using a 3.9 from a disco.

I can tell you that I think the following works:

3.9 v8 from disco
bell housing and input shaft from v8 r380 gearbox
r380 manual box
v8 engine mounts (different to 200tdi mount locations).

I guess you'll have the lt77 box on that 200tdi, so not sure what the situation iis if you want to keep that gearbox.

the disco box (r380?) will have the wrong shifter on it.

not sure if the bulkhead/seatbox might be different on a 200tdi.
 
Thanks for that , was hoping to drop in disco drive train as is with new clutch and
new mounts any thoughts ?
 
IamRobbie said:
Just a quick question dave on that, I thought that conversion from ashcroft required the top housing from a R380 defender gearbox. Are you saying that it can be done with an LT77 defender top housing?
Click to expand...

Yes, LT77 top housing will work. You just need to plug the reverse switch plunger hole.
 
You must log in or register to reply here.

Similar threads

R
Defender TD5 oil change
Replies
3
Views
542
miktdish
miktdish
R
1998 defender pickup rebuild. I need help.
2
Replies
26
Views
946
re-volt
R
M
Spitting output housing from Transferbox
Replies
16
Views
516
miktdish
miktdish
D90 Td5
Defender Td5 Gearbox Mounts
Replies
3
Views
887
dag019
dag019
M
Starter problems on 1996 300TDI 90.
Replies
2
Views
520
M1CYO
M
Back
Top