Defender 300 TDi Project!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
My zinc primer and fe-123, which is award winning rust converter, but expensive, arrived today.

1619251_10152338157420730_1136631_n.jpg


These are to paint the front and rear bumpers/cross members

So today was the front bumper, heres some before shots, also showing the rusting areas

1966266_10152338159940730_1377163332_o.jpg


1271785_10152338159915730_264772834_o.jpg


1655185_10152338160505730_2114913063_o.jpg


The fe123 applied on those rusty areas plus the ends of the chassis rails and inside the jacking point holes

1909421_10152338160895730_1303295447_o.jpg


Masked everything off

901780_10152338160110730_1680434170_o.jpg


Zinc primer

1899864_10152338160655730_10257711_o.jpg


Coat of black rustoleum

882261_10152338160740730_1747638505_o.jpg


Where the rusty areas were

904076_10152338161145730_1306307957_o.jpg


Some final pics

1781027_10152338161330730_1884911407_o.jpg


983636_10152338161505730_906319685_n.jpg


1270019_10152338161535730_1408613966_o.jpg
 
started the refurb of the rear section,

got wood?

10258393_10152351164045730_8092522534833896161_o.jpg


**** loads of black acoustic carpet, like they use on sub boxes

1909328_10152351164350730_1620484381780557200_o.jpg


ripped the rubber sheets out that were already there

1911297_10152351164030730_2068654494335635212_o.jpg


floor made

1956829_10152351164165730_8795661553654590381_o.jpg


screwed that down, then carpeted

965909_10152351163700730_6051753814491783534_o.jpg


1912115_10152351164190730_2767031582372330957_o.jpg


Ledges to do tomorrow
 
Well I finished off the carpet on the floor area

First off to cut the side bits on the ledges

1980449_10152352601135730_2392653203601515334_o.jpg


Then the tops

10257198_10152352601235730_858034009505715016_o.jpg


Other side

885802_10152352600785730_6813090743161821329_o.jpg


Then removed out the car

737146_10152352601220730_3455212484009396238_o.jpg


Covered with the carpet

10014213_10152352601195730_222213149372908459_o.jpg


back in, finished pics

980247_10152352601995730_3330815500006953092_o.jpg


1601758_10152352602660730_850891330643179342_o.jpg
 
Todays job was the respray the rear bumper/x member

First job was to angle grind this off, as I didn't have a key!

11578_10152355149570730_9141552979607637856_n.jpg


Could remove the tow hook then

10177229_10152355149970730_3067546867828712634_n.jpg


10253988_10152355149820730_2856987754040401328_n.jpg


Masked it all off

1977383_10152355150175730_4975003291361471471_n.jpg


Zinc primer

10014618_10152355150195730_2512413787646239256_n.jpg


And on this

1531568_10152355150520730_6769648642387877460_n.jpg


First coat

1560644_10152355150635730_4264214987238097834_n.jpg


10256529_10152355161550730_5357171485221570704_n.jpg


Finished pics, just need a new padlock

10251889_10152355150765730_7651370515558021683_n.jpg


10153837_10152355151140730_108905432255170623_n.jpg


1797346_10152355151095730_7953416273034405855_n.jpg
 
Washed all that sand from the Sahara off today, so took advantage of it looking clean and took some pics, I hope these don't anger people too much

Shiny vinyl in the sun

13852531724_a42b1fe3f8_b.jpg


13852184853_7fca8c5dc4_b.jpg


13852523334_66f2bd9ccf_b.jpg


13852174533_2ec54bc9d3_b.jpg


13852138385_9393bdfe8e_b.jpg


13852134025_6580a58a9c_b.jpg


13852161353_0b44f3ee58_b.jpg


13852500434_3d0b292181_b.jpg


13852497054_2e1975d47f_b.jpg


13852148823_ee7f253241_b.jpg


13852486494_08697987b9_b.jpg


comments welcome
 
Keeping it looking fresh. Great effort - and thanks for documenting what you've done as I will refer back in future.
 
So I painted the rest of the wheels

1622094_10152364537970730_4266937040763887063_n.jpg


Now for a bit of an unexpected update, I found these retrim kits for the seats, they only cost £54+vat so I was a bit sceptical so I only bought one to try. When it arrived I was amazed at what you get for the money

1509319_10152364538060730_1377970301095048971_n.jpg


In the box is retrim pieces ready made for all three sections of the seat, full foam inserts to replace all the old stuff, various bits for attachment, spray glue and an instruction dvd

10262033_10152364538245730_2160544157232418018_n.jpg


Ordered black to go with the black theme inside, first up the sort of wear on the existing seats

10269398_10152364537835730_7228952606876378725_n.jpg


10155173_10152364537905730_2671081519554200898_n.jpg


Removed the seat

10259929_10152364538090730_565074685079903898_n.jpg


Removed the squab

998978_10152364538330730_3886711523509568844_n.jpg


And the squab cover

10247459_10152364538425730_9102080129880753149_n.jpg


Old foam,

1422549_10152364538550730_7837633784112904556_n.jpg


Removed next to frame

10156106_10152364538625730_2848144166549310492_n.jpg


New foam insert on

1958111_10152364538660730_2236415944009933820_n.jpg


Then started on the headrest, removed cover

1509153_10152364538800730_103386323286481453_n.jpg


New cover on and stapled down to hold in place

10246832_10152364538855730_637265195111029059_n.jpg


Then screwed down the metal cover

10152524_10152364538980730_5128712887627514407_n.jpg


Removed the foam and cover off the bottom cushion

1902990_10152364539080730_5046824073644710014_n.jpg


New foam piece on

10288766_10152364539035730_2307627496008464891_n.jpg


Cover on

1613976_10152364539295730_557022206399268730_n.jpg


Whole seat recovered

1395974_10152364539325730_1258565495528181982_n.jpg


In the car

10255124_10152364539315730_312323766440836409_n.jpg


Quite impressed with this so ordered the other kits to do the rest of the seats
 
Yep did mine with the XS retrim kit, easy to do and made a world of difference, mine smelt a bit doggy when I got it but this sorted it, Before anyone starts I mean of dogs not of dogging...that's a whole different aroma
 
Back
Top