D2 Oil pressure switch?
- Thread starter Descapri
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesDiscoTD5
Active Member
- Posts
- 94
- Location
- West Midlands
It's fine, the black wire isn't needed as the switch earths through its body.
Excellent and thanks for the info
sierrafery
Well-Known Member
- Posts
- 17,939
- Location
- Arad/Romania
If no warning light on ignition it's a big problem i hope you are aware of that ... cos in that case you dont know if it comes on for low pressure or not
I don't at the minute so need to sort that out.
Yes I know that sierrafery it doesn't illuminate during the bulb check so need to sort the problem.If no warning light on ignition it's a big problem i hope you are aware of that ... cos in that case you dont know if it comes on for low pressure or not
Landmark2
Well-Known Member
- Posts
- 805
- Location
- Shropshire
Hi, When I had my clutch replaced the person obviously snapped the oil pressure wire. They repaired it but conected it to the wrong terminal on the switch. Just a thought.
Griff
Griff
Exactly my thoughts as a lof clutch was fitted December last year I've left a message for the previous owner and awaiting a response..
