Max Ravenscroft
Member
- Posts
- 32
- Location
- Cheshire
With having everything off I think I’ll remove the nut as they did and tap the shaft out! Looks a lot easier and less intimidating that way
D2 lift kit!
- Thread starter Max Ravenscroft
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Max Ravenscroft
Member
- Posts
- 32
- Location
- Cheshire
Also, I’ve found a Bearmach full gasket kit on Fleabay for a very good price - even if I don’t use all of the gaskets straight away I think they are worth having. I take it my Disco will have LT230 transfer box in it?
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Yep, you can roll under and grab the serial number off it and that will let you know which variant it is, serial number is next the filler plug on the back of the transfer box.
Max Ravenscroft
Member
- Posts
- 32
- Location
- Cheshire
That’s awesome thanks. Will it have LT230 stamped on it also?
- Posts
- 9,105
- Location
- Roaming the UK on assignments
You do realise that the D2 only had the LT230 in Europe and even in North America? Some had centre diff lock and some didn't, depending on your serial you can work out whether or not yours has it fitted.
Max Ravenscroft
Member
- Posts
- 32
- Location
- Cheshire
I know it’s fitted, I can get under it with a pair of mole grips and lock it in, it even shows on the dash
- Posts
- 9,105
- Location
- Roaming the UK on assignments
I know it’s fitted, I can get under it with a pair of mole grips and lock it in, it even shows on the dash
You just need the linkage for it then.
Max Ravenscroft
Member
- Posts
- 32
- Location
- Cheshire
And is that just a simple bolt- in job? If I get the correct linkage?
- Posts
- 9,105
- Location
- Roaming the UK on assignments
Max Ravenscroft
Member
- Posts
- 32
- Location
- Cheshire
Just the job - thanks!
