(D)utch series III

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Little art

Active Member
Posts
119
Location
Nijmegen
So here it is, cou’se we know diesels and stuff.

I am getting 50, so the car does.
It’s off the road for like 10yrs and it’s mott free. But doesn’t run.

We have, two motors.
Both petrol, 2,25.
First one as bought 24v 3 bearings
2’d 12v 5 bearings.

So first weapon of choice is, what?

The d3 😝 is stripped to the bone.

Greetings from over the pond, it’s hot outside 🤌
 

Attachments

  • B27242C8-3AA6-4AF7-A869-4E40005C650F.jpeg
    B27242C8-3AA6-4AF7-A869-4E40005C650F.jpeg
    286.6 KB · Views: 73
Hi, Hot here too, unusual here on West Wales coast. I think choice may well be down to condition of engines.
Starter can be spun up with engine on the ground and compression test done.
If both similar then later engine would be my choice.
The 3 bearing can be changed to 12v by swapping ancillaries if the better unit.
Any idea of miles/kilometers on them?
 
Back
Top