Matt reilly
New Member
- Posts
- 6
- Location
- Ireland
My high pressure fuel pump sprung a leak recently. After some searching on this forum and YouTube, I found out a special tool was needed (part number 12-178 I believe).
The parts didn't look too complicated so I decided to make it myself.
I eyeballed most of the dimensions but as for the threads I borrowed a gear sprocket from a seized engine to get the thread size.
For anyone who might be interested in making their own. The outside sleeve thread is M40x1.5 and the inside sleeve thread is M30x1.5
The parts didn't look too complicated so I decided to make it myself.
I eyeballed most of the dimensions but as for the threads I borrowed a gear sprocket from a seized engine to get the thread size.
For anyone who might be interested in making their own. The outside sleeve thread is M40x1.5 and the inside sleeve thread is M30x1.5