crashed 110, needs parts

A

Alpinelandy

New Member

Posts

30

• Jul 12, 2014

• #1

Hey all,

My mate has crashed his 110 and local prices for parts are coming in at well over €2k! (the french are just mental for car part prices). So trying to save him as much money as possible, where would be best to look for these parts?
Ordering from the UK is no problem as we often drive to and from there.

right front wing
right front top wing (next to bonnet), is it even a seperate part?
front metal panel
front metal bumper bar and mounts
right front headlight (lhd model)
plastic shroud for right front head light
front grill
metal bull bars.

Was doing some off roading and drove into a small tree!

err also it's had a diy spraycan matt black paint job so the colour of the panels does not matter.

thanks!

 

the_wolf

Well-Known Member

Posts

16,791

Location

Stonehouse, Scotland

• Jul 12, 2014

• #2

Get yerself on eBay

 

trax

.

Events Planner

Posts

10,639

Location

Oxfordshire

• Jul 12, 2014

• #3

and where do you often drive to, etc.. might be someone selling parts

 

A

Alpinelandy

New Member

Posts

30

• Jul 12, 2014

• #4

Brighton area in the UK but anywhere that will deliver is fine as also drive to the southwest a lot, local parts (near Gap, France) are stupidly high even second hard.

ebay, might be a good call. had some hassle using them in the past though.

thanks!

 

djbarren

New Member

Posts

104

Location

Co.Armagh. N.Ireland

• Jul 12, 2014

• #5

I have the Plastic Grill and Surround's lying around somewhere, they are well faded but a wee lick of paint would sort that out. There his if he wants them

 

A

arc

Active Member

Posts

338

• Jul 12, 2014

• #6

Nr brighton there is gumtree, safari engineering and dropzone. They're all Landy specialists and break vehicles too. There is another one up dorking way iirc. All have websites. That said, parts you've mentioned aren't expensive I you stick to pattern parts from paddock etc.

Nothing useful in / around Brighton itself tho.

 

A

Alpinelandy

New Member

Posts

30

• Jul 29, 2014

• #7

thank you all!

got a new wing asembly from ebay. light, grill, rad, bull bars and some plastics all ordered and in the post.
found it had an oil cooler on it too that had ripped open, got a cheap core from ebay.

going to get the spanners out in a few weeks once we've done the round trip back to the UK to get the parts. will try and do some before and after pics too aswell.

thanks for the tips people!