Couple of headgasket removal questions.

spurs · Nov 9, 2014

Hi all,

I'm replacing my head gasket tomorrow but I got a couple of questions. I understand I have to remove my rocker assembly but can I ask a real daft question why? As I can access all head bolts with it in place. I guess this is to aid adjusting the valves when reffitting?

Kyle

jamesmartin · Nov 9, 2014

you try fitting it and pushrods back with in in place, apart from it will lift head up twistedly as you loosen bolts, make sure you drain block by removing bung on block side before undoing head bolts

spurs · Nov 9, 2014

Oh that answers that then lol
So are heads that fragile that it will twist it that much with rocker assembly in place?

whitto999 · Nov 9, 2014

There are lots of bolts under the rocker cover &#55357;&#56883;

Couple of headgasket removal questions.

spurs

Active Member

jamesmartin

Well-Known Member

spurs

Active Member

whitto999

Member

Similar threads