P38A Continuing EAS troubles

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I got a bottle of Lagavulin Islay single malt scotch whisky (16 year old) That my son bought me 2 years ago, I have a glass now and then, best scotch I have ever had... thats why in not swigging it down
 
Hi, looks like you could well be right again Wammers, careful inspection by my son has revealed eccentricities of the cones and a slight displacement of one of the O rings. I have sent a pm to Kurtjohnson to see if he has any new ones. I will keep you informed. thanks for the help.
 
tarphenry said:
Hi, looks like you could well be right again Wammers, careful inspection by my son has revealed eccentricities of the cones and a slight displacement of one of the O rings. I have sent a pm to Kurtjohnson to see if he has any new ones. I will keep you informed. thanks for the help.
Click to expand...
You mean right again, analytical mind supersedes guesswork.
 
As I said right again, just been on to Kurtjohnson10 for some new NRV,s.hope that it fixes the problem,if not its one less thing wrong.
 
I did the nrv's a while back, made a massive difference. Weirdly, it will raise itself up from access when started. It never did that before I changed the nrv's... Fluke maybe..
 
Hi all, received the new NRV valves from Kurtjohnson10 this am fitted and they have made no difference at all. vehicle still refuses to move on command.( Glad I did the valves though at least that is one problem I don,t have) any more ideas I can try?
 
Ours too.

If there is air in the tank and no leaks then surely it has to be the driver pack or valve block? Valve block would have to be seriously leaking to stop it going up.
 
I am thinking that maybe the driver is not receiving the signal to raise the car. I will check tomorrow,all the wiring to the valve block.
 
Can I trick the car into thinking that the door is shut by closing the latch on a screwdriver,whilst I check the wiring
 
Double check your pipes are all in there correct place. Write a check list for us please of everything you have carried out. Posts can go on and details can be forgotten. Unless your wammers the seer of all:p.....
Maybe something stupid is stopping the rig from working as it should..o_O
 
tarphenry said:
I am thinking that maybe the driver is not receiving the signal to raise the car. I will check tomorrow,all the wiring to the valve block.
Click to expand...
Have you bent a pin in the driver plug or is a wire loose in the driver plug ?
have you made sure the plug from the valve block is fully connected to the driver pack plug :)
 
You must log in or register to reply here.

Similar threads

Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
940
Datatek
Datatek
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
857
kevleaper
K
Flossie
P38A Eas issues
2
Replies
22
Views
1K
Datatek
Datatek
feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
607
Mark Piercy
Mark Piercy
Back
Top