clutch problem freelander 2000

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

antndif

New Member
Posts
1
get in the car drive 3/4 miles taking the wife to work no problems put it in reverse the the clutch pedel will stay down ,pull it back up with my foot its ok again . it might only happen once or twice a week otherwise no other problems the clutch is not slipping anybody got any ideas how to solve this problem thanks .:confused:
 
Hi. Bad news. Had same problem in August 2007. Clutch eventually went completely. Car had full lift from yorkshire to staffs. Still in bits now. So far had new slave and clutch plate kit, master cylinder and now awaiting new fly wheel. Been ripped off so far. Take it to a garage you can trust and get it sorted before it goes altogether. Sorry...
 
Could be play in the clutch bracket on the gearbox housing, mine broke a couple of weeks ago and i lost all the clutch fluid from the sealed unit, it just exploded,.
Before it went i had some trouble engaging gear its worth checking and if you have to replace it its only a couple of quid.
Hope this helps
D
 
MY FL PETROL 1.8 GS has a limp clutch can move it up and down with hand. loads of fluid leaked under car. been told master/slave cylinder replacement....

you reckon?
 
Hi Antndif

You don't say which model it is. I had a 2000 1.8 petrol that this happened to just as described until one day it went completely on a 3 lane roundabout (middle lane rush hour :eek:) and wouldn't go into gear! I gota new complete master and slave (it comes as one part) same day from the LR Stealer for about £80 quid. It took about 30 mins to fit master is a quarter turn twist in the bulkhead and just pushes onto the pedal and the slave end is held by a plastic clip.

If I were you I'd change it soon or the wife will give you some proper ear ache :blabla: when it leaves her stuck somewhere!

Hope this helps

Tony
 
Hi just seen this thread.. Ive got a FRL 2000 1.8 petrol, clutch pedal has just hit the carpet and cant change gear, managed to limp home. Any idea wher I can buy the part(s) required ? I believe its all one unit complete master and slave. Im in Stockport Near Manchester any help would be appreciated especially on parts and someone who can fit.. !!

Thanks
 
tonysb1 said:
Hi just seen this thread.. Ive got a FRL 2000 1.8 petrol, clutch pedal has just hit the carpet and cant change gear, managed to limp home. Any idea wher I can buy the part(s) required ? I believe its all one unit complete master and slave. Im in Stockport Near Manchester any help would be appreciated especially on parts and someone who can fit.. !!

Thanks
Click to expand...

I'VE got a thread on this and there are nearly as many k series/PG1 clutchfaults on here as there are tyre size threads...

:search::search::search:
:(
 
I wish to thank everyone that assisted me with this, part was Master Cylinder & slave as quoted previously, new part from ebay £50, and mobile mech £40 so all sorted for the fair sum of £90, so thanks again.. im back on the road..:)
 
You must log in or register to reply here.

Similar threads

KiwiTDI
Disco 1 Torque converter lock up clutch “slipping” after lock up
Replies
7
Views
412
KiwiTDI
KiwiTDI
M
2004 Freelander TD4 Sport 3 Door
Replies
11
Views
956
mudinuri
M
G
Land Rover 300tdi clutch not disengaging after engine out
Replies
8
Views
869
miktdish
miktdish
A
Freelander 2 (LR2) Freelander 2 TD4 jolting/stalling while driving
Replies
0
Views
681
Azalear
A
C
Automatic transmission hesitation
Replies
4
Views
729
Captain_Black
C
Back
Top