Clutch pedal

Alteredtech · Dec 2, 2024

Sometimes when the master fails, it leaves black rubber parts in the fluid.

Check that you don't have black rubber parts in the fluid.

J_D · Dec 2, 2024

I found a syringe, can get from chemist, is useful for filling as long as you don't squirt it too fast.

Alteredtech · Dec 2, 2024

J_D said:
I found a syringe, can get from chemist, is useful for filling as long as you don't squirt it too fast.

For a right hand drive is easy to fill the master, but in the left hand drive, the bottle is under the fusebox

Cyrus 200 · Dec 2, 2024

Alibro · Dec 13, 2024

IIRC the clutch master was sorted in this video so maybe worth a watch

Alteredtech · Dec 14, 2024

I immediatly recognise the english accent from Germany.

Alteredtech · Dec 14, 2024

Alibro said:
IIRC the clutch master was sorted in this video so maybe worth a watch

German peoples, not long before mentioning the BMW engine

Bife · Jan 27, 2025

Alteredtech said:
I immediatly recognise the english accent from Germany.

I would say that from that accent, its around Darmstadt, more specifically Dieburg, in the Frankfurt am Main area

Alibro · Jan 27, 2025

It's a very entertaining channel where two Germans make fun of just about everyone, especially themselves.
They started by documenting the maintenance and repairs of their Disco's and now buy broken Disco's to repair. The latest is a Disco 4 with a melted piston caused by neglect and no oil.

Arctic2 · Jan 27, 2025

Alibro said:
It's a very entertaining channel where two Germans make fun of just about everyone, especially themselves.
They started by documenting the maintenance and repairs of their Disco's and now buy broken Disco's to repair. The latest is a Disco 4 with a melted piston caused by neglect and no oil.

Another follower i see i find their channel quite good entertaining and with good knowledge to learn from, i think the guy is an engineer, his wife gets stuck in to.

Alibro · Jan 27, 2025

Arctic2 said:
Another follower i see i find their channel quite good entertaining and with good knowledge to learn from, i think the guy is an engineer, his wife gets stuck in to.

I think he mentioned he sells or designs or maintains (or maybe all three) machinery for balancing drive shafts and prop shafts.

Clutch pedal

Alteredtech

Well-Known Member

J_D

Well-Known Member

Alteredtech

Well-Known Member

Cyrus 200

Active Member

Alibro

Well-Known Member

Alteredtech

Well-Known Member

Alteredtech

Well-Known Member

Bife

Active Member

Alibro

Well-Known Member

Arctic2

Well-Known Member

Alibro

Well-Known Member

Similar threads