Clutch bite low.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

Gooders200

Member
Posts
36
Location
Devon
Hi all. Just got my first Landy TD4. 2005. Not a stranger to general maintenance . Please be gentle as not tackled this before. I have read lots on this subject the general suggestion being air in the system. Couple of questions. can I bleed clutch from top of engine ie via redo our etc don’t really want to have to get under car if I can help it. Got a bleed kit which should make it easier. Not sure exactly where bleed nipple is. As I say a step by step help guide would be great. Look forward to hearing from you. Thanks in advance.
 
Would anyone start at bleeding the clutch first? I gather there is a bleed nipple on the master cylinder which looks reasonably accessible. Not had a close look yet as weather been terrible but would that be the place to start? If so is the bleed nipple easy to get to?
 
Have you pumped the pedal to see if the bite point gets higher? If you have and it's made no difference, it probably don't need bleeding.

Col
 
Gooders200 said:
Would anyone start at bleeding the clutch first? I gather there is a bleed nipple on the master cylinder which looks reasonably accessible. Not had a close look yet as weather been terrible but would that be the place to start? If so is the bleed nipple easy to get to?
Click to expand...

Hello and welcome...you bleed a clutch at the slave cylinder ask in the relevent forum section..you introduce you and your vehicle here...
 
Welcome to the forum
I7pha4t.jpg
 
You must log in or register to reply here.

Similar threads

A
Td5 No clutch bite point
Replies
0
Views
465
Anaconda
A
U
Freelander 2 (LR2) Clutch bleed nipple
Replies
4
Views
2K
ULTRASONIX
U
M
What is the correct way to bleed a series 3 clutch?
Replies
2
Views
2K
tottot
tottot
S
300Tdi clutch
2
Replies
39
Views
4K
Anaconda
A
A
Discovery 1 300 tdi new clutch will not get no gears
Replies
9
Views
1K
liliana fox
L
Back
Top