Clock stops with ignition off

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grit Valve

Grit Valve

2000 4.6 Vouge
Posts
12,465
Location
Plaistow
2000 4.6 Thor
My first minor problem

As above interior lights still turn on
Every time the ignition is turned off the clock stops thought it was a permanent live feed ?
Would there be spare wires around that area thoughts please think someone has swapped it with an ignition feed wire
Thoughts please
J
 
Hi Jo
the clock on mine runs slow but i havnt had time to check it but the other problem i have is the radio wont switch off when ignition is switched on so i have to disconnect it because it annoys me. any one any ideas on that? sorry to hijack thread
 
Clock is fed by fuse 1. Should be permanent live. Check RAVE it also feeds a few other things. Would think either the fuse is blown or there is a wiring cockup somewhere. Switching the ignition on or off should not influence the clock. My guess would be someone has played with the radio and cocked the wiring up. On 2000 models fuse 1 also feeds memory of low and mid point radios.
 
Last edited:
All feed wires from Fuse 1 are Purple. Other than the feeds for rear footwell lamp and window switch out station, which are Purple/blue. Low and mid line radios fitted to MY 2000 have two permanent live feeds, (Purple wire) on pins 2 and 4. Radio is powered on by relay 7 BECM White/pink to radio pin 7 with ignition at or better than position 1.
 
Last edited:
I'm going to live with it for now .
I've now worked out it just stops randomly after the ignition is turned off.
Hours later sometimes
It's not worth disturbing everything for a clock
Well thanks for the replies and hello to you all .
J
 
Grit Valve said:
I'm going to live with it for now .
I've now worked out it just stops randomly after the ignition is turned off.
Hours later sometimes
It's not worth disturbing everything for a clock
Well thanks for the replies and hello to you all .
J
Click to expand...

Maybe the clock is knackered. You said it stopped when the ignition was turned off. That was taken as straight away, now you say it stop randomly after differing time lapses. That can only be a duff clock i would have thought. If everything else supplied by fuse 1 is functioning.
 
Yea it's true warmers thing is every time I get in I reajust it
So I must
leave it and study it more
I thought it was just randomly turning itself of or maybe when it's goes to sleep were my thoughts .

Time to study !
 
Grit Valve said:
Yea it's true warmers thing is every time I get in I reajust it
So I must
leave it and study it more
I thought it was just randomly turning itself of or maybe when it's goes to sleep were my thoughts .

Time to study !
Click to expand...

If you look at the diagrams Fuse 1 provides nine separate things with a permanent power supply Clock, Radio memory, Key illumination instrument cluster and such. Unless you have to reset radio code every time you get in, and your foot well lamps don't work or key illumination or you don't get key in ignition warnings Etc. Then fuse one power is fine. It can only be feed to clock, ground from clock or clock itself.
 
You must log in or register to reply here.

Similar threads

J
Help please! Electrical issue with 1995 Defender 110 County, 300 tdi
2
Replies
35
Views
2K
Oliverryan96
O
P
Permanent Live even with ignition off?
Replies
10
Views
1K
marjon
marjon
H
P38A 1997 2.5 cranks dont start
Replies
6
Views
2K
Datatek
Datatek
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
J
Issues with warning lights and limp mode
Replies
2
Views
1K
Hippo
Hippo
Back
Top