Richard Martin
Well-Known Member
- Posts
- 1,371
- Location
- Cardiff
Glad you got it started Mike...
cheap ass glow plugs.... HELP PLEASE
- Thread starter MikeDISCO
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Glad you got it started Mike...discomania
Well-Known Member
- Posts
- 6,947
Excellent. Ready in time for the weekend!
- Posts
- 760
- Location
- Staffordshire
Just wanted to say thanks very very much for everyones help and advice !
bigjohn1
New Member
- Posts
- 30
- Location
- County durham
Nice one mike pleased you got it sorted
- Posts
- 760
- Location
- Staffordshire
This Morning she wouldnt start again! removed the bleed screw from the top of the filter housing, after around 8-10 turns she started, I left the screw out, it ran for around 20 seconds before any fuel came out the hole. definately air getting into the system.
Changed injector spill pipes for new ones. checked the condition of the drain plug which looked fine, made sure it was tight ensured all injector pipes were tight.
Is there any where else i should be looking?...
Changed injector spill pipes for new ones. checked the condition of the drain plug which looked fine, made sure it was tight ensured all injector pipes were tight.
Is there any where else i should be looking?...
Dent
New Member
- Posts
- 1,051
- Location
- North shropshire
Check the fuel pipes that go into the tank unit, remove the round plate in the boot floor and you can see the tank unit , clean them and check for pin holes.
- Posts
- 760
- Location
- Staffordshire
Tomorrow I will be checking the fuel sender unit connections, fuel sedimentor and smearing em all with some clear silicon to be safe.
And with advice from Discomania putting some PTFE on the union connections I have undone during the past week.
also a new filter to be sure. will also check the filter bracket for fractures and cracks.
And with advice from Discomania putting some PTFE on the union connections I have undone during the past week.
also a new filter to be sure. will also check the filter bracket for fractures and cracks.
