danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
That's a nice picture that mate. I was knackered after running after that.
Changing van sides for window sides
- Thread starter richardr33
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
I bet you hadn't run that fast since you got chased by the rozzers after climbing out of someone's bedroom window in downtown Scouserville
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Now now always there with the scouse jokes aren't you. But as this is a public forum I don't know what you are talking about with robberies haha lol.
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
It's just they always used to say that scousers were like Batman cos they could never go anywhere without Robin
danny6801
Well-Known Member
- Posts
- 1,665
- Location
- North Wales
Haha.
Sorry about hijacking this thread back to its origins (windows) but which tint are these 15%?
Marmaduke
Well-Known Member
- Posts
- 9,773
- Location
- Near the land of 'Me Duck'
Mine are the green tint type
http://www.masai4x4.com/#!/Side-Sli...and-Rover-Defender/p/3429573/category=1022096
Which are a similar tint to the front windows
Thanks, I'm looking at changing mine as they are rattling badly, I think I may go for the dark tint.
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
@Kwakerman my windows were rattling like fook,
if you take a 4 or 5mm cable tie (a long un or several short ones) and chop the head off it. You can slide it down underneath the glass and this stops the ratlling
if you take a 4 or 5mm cable tie (a long un or several short ones) and chop the head off it. You can slide it down underneath the glass and this stops the ratlling
Good tip, I currently have Blutack stuck in there as they are rattling sideways, I was looking at tints as I often have guns etc in the back and it will help reduce prying eyes (once I do the rear too).@Kwakerman my windows were rattling like fook,
if you take a 4 or 5mm cable tie (a long un or several short ones) and chop the head off it. You can slide it down underneath the glass and this stops the ratlling
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
well fitting the tints is easy,
blue tack will just spread into the largest gaps, the stuff you shove in there needs to be "reasonably" firm.
Pipecleaners work as well
blue tack will just spread into the largest gaps, the stuff you shove in there needs to be "reasonably" firm.
Pipecleaners work as well
