Griffdowg
New Member
- Posts
- 7,194
- Location
- Somewhere in Bristol
but only 4 *smirk*
CB radio advice
- Thread starter johnacky
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i heard he's accepted 450 Million for it - or was that myspace.com
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Think it might have been myspace.com
Galen
New Member
- Posts
- 276
- Location
- Staffordshireshire
I'd be very interested to know why antenna price has anything to do with SWR?
Is the impedance of the cheaper antennas a lower quality Z?
DK17
Banned
- Posts
- 777
- Location
- Redruth, Cornwall
DK17
Banned
- Posts
- 777
- Location
- Redruth, Cornwall
I'd be very interested to know why antenna price has anything to do with SWR?
Is the impedance of the cheaper antennas a lower quality Z?
a more expensive antenna would be better made and matched up for the fequency band
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
I'm reserving judgement.
- Posts
- 83,273
- Location
- Embasinga stocæ
so wot cb wud yu recomend then guys?
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
The best way to get a SWR of less than 1.5:1 in a landrover is to mount the twig in the centre of the roof, with a foot square sheet of steel or copper under the base of the mount, then run a thick wire from the steel / copper sheet down to the chassis.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
Midland, if you can get one.
- Posts
- 83,273
- Location
- Embasinga stocæ
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
The older ones (with a blue bezel) were better, but that will do just fine.
yella
New Member
- Posts
- 15,991
thats an 80 channel, if you just want it for a bit o banter while laning just get a straight 40. you can pick up bargains on ebay, personally i still use a york jcb863 but there are plenty of well priced rigs out there
yella
New Member
- Posts
- 15,991
yer meen the midland 1001 series, the 4001 was top o the range but the 2001 was equally as good
- Posts
- 83,273
- Location
- Embasinga stocæ
yeah but i heard alot on e-bay are european models which are on a diff waveband - or old ones that dont comply any more - at that price it dont seem like its worth taking the risk - no?
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
thas the bugger - fink it were a 2001 I had back along.
yella
New Member
- Posts
- 15,991
aye thats true daft, you want an older one with27/81 in a circle on it
yella
New Member
- Posts
- 15,991
yella
New Member
- Posts
- 15,991
stay away from uniden, they have a different motherboard in em
Similar threads
