Can't seem to apply diff lock

Shortandfluffy · Jun 3, 2013

Hi I can get my disco 1 into low range but can't apply difflock, the little knob only seems to go forward and back, am I being an eejit or does it sound wrong,
Thanks in advance

Dr_evil · Jun 3, 2013

http://www.landyzone.co.uk/lz/f8/transfer-box-lever-stuck-high-range-225776.html

jayf12000 · Jun 4, 2013

Shortandfluffy said:
Hi I can get my disco 1 into low range but can't apply difflock, the little knob only seems to go forward and back, am I being an eejit or does it sound wrong,
Thanks in advance

i thought i had the same problem until i noticed that a previous owner had fitted a borg warner transfer box when changing from v8 to 300tdi.
i had the ctr console out and all the rivets drilled out to try and sort a sticking leaver before i noticed what was what.

Shortandfluffy · Oct 24, 2013

Mine did that I just forced it to loosen it up they seem to seize if they not used,
Mine fine now

hodgey2k12 · Oct 24, 2013

jayf12000 said:
i thought i had the same problem until i noticed that a previous owner had fitted a borg warner transfer box when changing from v8 to 300tdi.
i had the ctr console out and all the rivets drilled out to try and sort a sticking leaver before i noticed what was what.

What's the difference on the borg warner then ?

discool · Oct 24, 2013

hodgey2k12 said:
What's the difference on the borg warner then ?

It was fitted as standard to the later RRC from 1990MY iirc. Google and you shall find the info u require.

Glb8686 · Oct 24, 2013

It'll just be the lever mech that's seized. Whip the gear gators off and mat then remove the rubber cover to gain access to it. Disconect the linkage and try move it side to side. If it dnt move then whip the whole thing off and soak in WD40 and try and persuade it free.

Alternatively just get a replacement thats not fooked!

Glb8686 · Oct 24, 2013

Infact here is pic of when i did mine.

The linkage you want to whip off is on the right (got a nut as a spacer in the pic)

That shaft should move Left and right freely.

DIFFLOCK66 · Oct 24, 2013

Shortandfluffy said:
difflock, the little knob

Oi!! Who are you calling me a little knob!

Arsewipe!

:multiply:

cold comfort farm · Nov 21, 2013

Glb8686 do I assume correctly that if the shaft is in the out position its in normal drive and if its pushed in its in diff lock.
Yep mine is stuck too, just in time for winter. lol. Want to sort it before the slippy stuff comes.

Thanks all

Can't seem to apply diff lock

Shortandfluffy

New Member

Dr_evil

Banned

jayf12000

Member

Shortandfluffy

New Member

hodgey2k12

New Member

discool

Well-Known Member

Glb8686

Active Member

Glb8686

Active Member

DIFFLOCK66

Well-Known Member

cold comfort farm

Active Member

Similar threads