can i fit this on a series 3
- Thread starter sprie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
It fits between the shelf and dash about in the middle with the switches angled towards the driver but I forget exactly how.
Hi Sprie. Unfortunately I’m not well versed enough to help wire it in but I’ve attached some photos of mine to help you locate the correct position. Hope this helps.
Attachments
- Posts
- 10,372
- Location
- A bit sarf of Dorking
Wildefalcon
Well-Known Member
- Posts
- 1,669
There's quite a bit more to it, there a relay for the brake lights ,a second indicator relay, and a good chunk of wiring loom. As well as the other side of the panel and the plastic...
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
We took one out of a mates series three many years ago. I couldn’t believe the amount of wires crammed behind it for a couple of switches. Can’t remember where they all went but very likely to a handy multi pin plug.
doriz
Well-Known Member
- Posts
- 17,312
Int that out of the V8 S1 set up.
Wildefalcon
Well-Known Member
- Posts
- 1,669
Late series 3 four cylinder as well.
thanks for the pointers. I can see this item https://www.ebay.co.uk/itm/272096215840
I will assume i can either mount my bracket there or a replacement bracket, and plumb the wiring accordingly.
I will assume i can either mount my bracket there or a replacement bracket, and plumb the wiring accordingly.
Attachments
- Posts
- 10,372
- Location
- A bit sarf of Dorking
That's the one, I've bought a few things from him, good seller.
