can i fit this on a series 3

sprie · 2024-07-26T10:16:12+0100

I bought this on ebay, partly as i needed a hazard switch. I can't find anything similar in any photos on the web. I can't work out if/where i could place this bracket in my dash - is there somewhere it can fit?

tottot · 2024-07-26T11:57:37+0100

It fits between the shelf and dash about in the middle with the switches angled towards the driver but I forget exactly how.

ANK84 · 2024-07-26T13:04:57+0100

sprie said:
I bought this on ebay, partly as i needed a hazard switch. I can't find anything similar in any photos on the web. I can't work out if/where i could place this bracket in my dash - is there somewhere it can fit?

Hi Sprie. Unfortunately I’m not well versed enough to help wire it in but I’ve attached some photos of mine to help you locate the correct position. Hope this helps.

boguing · 2024-07-26T21:39:11+0100

I think @sprie's only got one side of it. There's also supposed to be a bit of vac formed plastic that covers the join at the front.

Wildefalcon · 2024-07-27T07:57:49+0100

There's quite a bit more to it, there a relay for the brake lights ,a second indicator relay, and a good chunk of wiring loom. As well as the other side of the panel and the plastic...

Bobsticle · 2024-07-27T09:07:21+0100

We took one out of a mates series three many years ago. I couldn’t believe the amount of wires crammed behind it for a couple of switches. Can’t remember where they all went but very likely to a handy multi pin plug.

doriz · 2024-07-27T09:17:11+0100

Int that out of the V8 S1 set up.

can i fit this on a series 3

sprie

Active Member

Attachments

tottot

Well-Known Member

ANK84

Member

Attachments

boguing

Well-Known Member

Wildefalcon

Well-Known Member

Bobsticle

De Villes Advocaat

doriz

Well-Known Member

Similar threads