Camping Trailer Defender Sankey Hybrid

benpalmer said:

Was able to get a bit more done over the last few weekends: firstly spraying the under coast white to "blend" the colours at the join - looked less obvious in the primer but hey ho.

View attachment 212687

Then mounting the tent to the roof which i had to modify the roof rack to fit.

View attachment 212689 View attachment 212690 View attachment 212691 View attachment 212692 View attachment 212693 View attachment 212694 View attachment 212695

Then test it all out and give the tent a clean and weather proof.

View attachment 212696 View attachment 212697 View attachment 212698

Also stuck in an RCBO as reading up this is needed.

View attachment 212699

Then making some jacking points so I can get it level when setting up - as the Sankey is so high I had to get creative as all jack legs I found would be too short to make any meaningful adjustment Just saw Bobsticals work and thinking that might have been a better idea, but I've started now, so i'll see how it pans out.

View attachment 212700 View attachment 212701 View attachment 212702 View attachment 212703 View attachment 212704

Click to expand...

Bobsticle said:

Bricks was my first idea

Click to expand...

Bobsticle said:

At the back I have simple tubes that drop vertically and lock off. Only problem with that is they take up internal space when you push them up out of the way.

Click to expand...

benpalmer said:

Being a Sankey mine has these at the back already. The idea of is that the front will be used to level the trailer onto the back legs.

Click to expand...