AXEMAN1984
New Member
- Posts
- 84
got a new exhaust for my series 3 109 and fitted it today, then only went and snapped one of the bloody manifold studs off.... 
Bugger!!!
- Thread starter AXEMAN1984
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
crashbox
Well-Known Member
- Posts
- 12,347
- Location
- In the UK, thankfully.
not good.
AXEMAN1984
New Member
- Posts
- 84
no deffo not good... just hopeing if I heat it up with sum oxy-acetylene I can get whats left of the stud to unwind, I had a few choice words lets put it that way... :frusty:
crashbox
Well-Known Member
- Posts
- 12,347
- Location
- In the UK, thankfully.
the joys of motoring.
tottot
Well-Known Member
- Posts
- 7,972
- Location
- west wales coast
Refit with stainles studs and brass nuts.
Johnny_Regis
Active Member
- Posts
- 103
5/16
AXEMAN1984
New Member
- Posts
- 84
the problem was, who ever changed the down pipe from the manifold last used steel bolts instead of brass ones, anyway I gingerly took the manifold off last night praying I didnt snap a stud off in the block, which thankfully I didnt, took the manifold into work today, sneaked into the workshop and put sum heat on it which done the trick and I got all three studs out, now just waiting on my new studs, brass bolts and gaskets from mr steve parker, then see if I can remember how to put it all back together, who would have thought one poxy little stud could cause so much bloody hassel... :frusty:
Am I the only person that still drills through the manifold and uses ordinary studding with a brass nut and washer at each end?
Before anyone starts shouting there are tapered washers available to level off the top of the manifold and give a square shoulder for the top nuts to sit on.
It doesn't matter if the studding shears as it is easy to replace!
Never had any problems since!
OSD
Before anyone starts shouting there are tapered washers available to level off the top of the manifold and give a square shoulder for the top nuts to sit on.
It doesn't matter if the studding shears as it is easy to replace!
Never had any problems since!
OSD
AXEMAN1984
New Member
- Posts
- 84
not a bad Idea that, Ive replaced with stainless studs and brass bolts this time, anyway im hopeing by the next time the exhaust needs replaceing it will be sombody elses headache, the poxy thing is just a money pit, I only bought it because I wanted somthing cheep to lug my firewood about...
Welcome to the world of owning a Land Rover!!
Please don't ever refer to it as a 'poxy thing'!!
You might upset some of us who actually love these beautiful beasts!
OSD
crashbox
Well-Known Member
- Posts
- 12,347
- Location
- In the UK, thankfully.
I agree, never refer to it as a Poxy thing, call it a feckin heap of rusting shxt and a total bitch like mine.
AXEMAN1984
New Member
- Posts
- 84
I agree, never refer to it as a Poxy thing, call it a feckin heap of rusting shxt and a total bitch like mine.
Ive got a brake overhaul to do next, and from what I can gather thats prob gonna be the next name it gets called once I try to bleed the system...
