dubbleRR
Well-Known Member
- Posts
- 1,018
- Location
- highlands of Scotland
Thats why i bought them as well ,,sucker for shiny bits
P38A Brakes!
- Thread starter Grrrrrr
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Spoken to a mechanic friend and he says one of his friends has Goodridge on his racing Healey so that sounds positive. He says they've got a thin Teflon coating inside rather than rubber if the braid gets damaged it can puncture it.
- Posts
- 2,427
- Location
- Isle Sheppy
The hel ones are stainless steel so shouldn’t rot as quick for the price I was thinking they would see me and the motor out
Datatek
Well-Known Member
- Posts
- 44,883
- Location
- Near Poitiers SW France
Only the braid is stainless, the pipe is the standard rubber/plastic stuff.
The outer braid is stainless steel. The inner pipe is PTFE Teflon.
The point of the stainless braid is to stop pressure causing the pipe to expand.
The whole thing is therefore thinner than the equivalent rubber hose & has a nicer cosmetic appearance.
BUT with the rubber hose it's easy to see any cracks during routine maintenance.
With the s/s that's impossible & your first indication that something's wrong is either visible leaking of fluid through the braid or brake failure - in both cases the inner hose has perforated.
You can buy kits to make up your own s/s covered ones (see youtube & there's some DIY horrors) & as they've already been mentioned on this thread this is one of Hel's showing how their ready-to-fit hoses are made. Can't say the cut crushing the end of the pipe then crushing it again to open it up to get the fittings in before crimping with a crimping machine increases my desire to rush out & buy some.
Although they & others must have made millions of the things & failures as a result of the build process are presumably rare.
www.youtube.com/watch?v=ryOo5ZJaVq4
This is their crimping machine: www.youtube.com/watch?v=B78j1T5rBRM
The point of the stainless braid is to stop pressure causing the pipe to expand.
The whole thing is therefore thinner than the equivalent rubber hose & has a nicer cosmetic appearance.
BUT with the rubber hose it's easy to see any cracks during routine maintenance.
With the s/s that's impossible & your first indication that something's wrong is either visible leaking of fluid through the braid or brake failure - in both cases the inner hose has perforated.
You can buy kits to make up your own s/s covered ones (see youtube & there's some DIY horrors) & as they've already been mentioned on this thread this is one of Hel's showing how their ready-to-fit hoses are made. Can't say the cut crushing the end of the pipe then crushing it again to open it up to get the fittings in before crimping with a crimping machine increases my desire to rush out & buy some.
Although they & others must have made millions of the things & failures as a result of the build process are presumably rare.
www.youtube.com/watch?v=ryOo5ZJaVq4
This is their crimping machine: www.youtube.com/watch?v=B78j1T5rBRM
Last edited:
