That's my problem, with me you never know, part of me thinks bolt in means easy out in the future for fuel tank, ease of access to sedimentor bowl, A frame bushes and ball joint and the other bit thinks drill the holes, blaze it in like all the other millions of em around an work underneath it.
Then, I'd bolt it inThat's my problem, with me you never know, part of me thinks bolt in means easy out in the future for fuel tank, ease of access to sedimentor bowl, A frame bushes and ball joint and the other bit thinks drill the holes, blaze it in like all the other millions of em around an work underneath it.
Welding would go faster, bolt in gives more opportunity & flexibility down the road.
Will measure it up to be certain but not very close.
The floor panel sits on a panel lip around it's circumference and is usually spot welded to the front, sides, rear and to the floor support bars that run across it.
Sorted! Will be a great upgrade with respect to servicing.I found these.
View attachment 174217
Look to need a couple of small skin pins to secure them but look at the way they have their own "O" ring seals, once they're in place and they'll be good for years and the bolts won't rust in the nuts either so right result
The floor panel sits on a panel lip around it's circumference and is usually spot welded to the front, sides, rear and to the floor support bars that run across it.
I bought a couple of rolls of the closed cell foamed neoprene door seal strip from Lidl ages ago, it's about 3/4" wide so should be plenty wide enough
Yeah, don't do it with a scaff tube and the car rolling
Closest I got to boy racer was a diesel 306 with chopped springs and a nova 1.4sr with ground hubs to fit cav wheels
I need about 3 inches of coverage over the tyres
View attachment 174223
Fell asleep on the couch with the babe after giving her a bottle an YouTube had auto played me to this from a This Old Tony vid.
Just wondering how far I could push the roller? I might be being a little over optimistic?
I need about 3 inches of coverage over the tyres
View attachment 174223
Fell asleep on the couch with the babe after giving her a bottle an YouTube had auto played me to this from a This Old Tony vid.
Just wondering how far I could push the roller? I might be being a little over optimistic?
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
