Sunnysidebb
Member
- Posts
- 14
- Location
- Loch Lomond
Hi all,
My beloved 300 TDi has started to fall to bits in just under the last 12 months.
I require help finding the best place to find resto panels to keep her on the road. I cant.....really cant contemplate scrapping her.
I need things such as:
C post repair panels just under the latch post
The rear arch panels that go under the rear doors and mate up to the C post under the door latch post. (both sides).
Top rear valance just as you climb into the boot/rear has rotted very badly and needs a full panel and not just patching.
I need to repair about 3 ft of chassis both sides level with the front seats. Both sides have rotted though along the bottom edge of the chassis.
Both rear mud flap hangers are starting to break down.
The rear exhaust bracket that comes off the chassis and holds the back box up has completely rusted and broken.
Has any one got a good source of panels.
The welding side is not a problem and can be taken care of.......the best place for bits , I hope will come from this forum.
Thanks in advance,
Frank
My beloved 300 TDi has started to fall to bits in just under the last 12 months.
I require help finding the best place to find resto panels to keep her on the road. I cant.....really cant contemplate scrapping her.
I need things such as:
C post repair panels just under the latch post
The rear arch panels that go under the rear doors and mate up to the C post under the door latch post. (both sides).
Top rear valance just as you climb into the boot/rear has rotted very badly and needs a full panel and not just patching.
I need to repair about 3 ft of chassis both sides level with the front seats. Both sides have rotted though along the bottom edge of the chassis.
Both rear mud flap hangers are starting to break down.
The rear exhaust bracket that comes off the chassis and holds the back box up has completely rusted and broken.
Has any one got a good source of panels.
The welding side is not a problem and can be taken care of.......the best place for bits , I hope will come from this forum.
Thanks in advance,
Frank