bilko

hi fellas new to the landy game and brakes i have a 110 defender if i pump the brakes the pedal gets harder and the brakes slip but if i use them normally its ok . oh yeh they also pull to the right a bit too much.can anyone help please .worried

brakes slip ?? can you give a slightly clearer explaination....they work normally ....got that.....pump them and what happens ?

sorry should have been more specific the brakes dont stop the vehicle the harder i pump the brakes the less efficent they become

If ah was you, ah'd change me user name furst so ye don't get **** loads of spam etc!
It might be an idea tae check the condition of the pads or calipers as well as /or drums on the back if fitted. Might just need a good bleeding

aye, hope yer like the thousand emails i sent !

presuming its a diesel ??
sounds like the vaccum pump mate, as yer got no vaccum on a diesel thers a pump to assist the servo and breaking,
to test it, have the engine off..pump the pedal till the breaks are hard, then with the pedal still pressed in hard, start the engine and feel the pedal go soft , if nothing happens , check the hoses etc then think about the pump , either strip or replace !

Thank you will try all methods .

try bleedin them before yer do too much buggering about, might just be a simple solution

If ye bleed the system and still find ye have the same problem, try checkin' all the pipe work for corrosion and splits as well.

can anyone advise on a site that i can get exploded views of parts for k reg 110 thanks.

wheres microcat wen yer need it