Bennehboy
Well-Known Member
- Posts
- 2,253
- Location
- Huddersfield
I don't suppose anyone knows where I can get a thinner jam nut for the difflock switch on my transfer case, I had to replace the switch as it was broken, but using the old jam nut I can't set the switch deep enough to close when difflock is engaged....
If I had a belt sand/wheel I'd just thin this one down (needs about 1-1.5mm off). Any ideas?
If I had a belt sand/wheel I'd just thin this one down (needs about 1-1.5mm off). Any ideas?
