ellodave
Member
- Posts
- 86
- Location
- Treherbert Rhondda South wales
how do you go about changing them then? just buy a 200tdi prop and chuck it on?
Before i set off off road.....
- Thread starter ellodave
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
RKServicing
Active Member
- Posts
- 757
- Location
- bicester
Need to change the flange on diff aswell.
Critical Mick
Member
- Posts
- 85
- Location
- Newcastle upon Tyne
It's not a straight swap, the 300 tdi has a 3 bolt flange on the diff and the 200tdi has a 4 bolts. As mentioned above Gwyn Lewis do a kit:- Click me!
This is what I used, no messing about with spacers, it's all built in. It also comes with a new oil seal. It's also a good idea to fit new UJs to the propshaft before you fit it.
I would budget a shade over £100 for the whole job.
ellodave
Member
- Posts
- 86
- Location
- Treherbert Rhondda South wales
Thanks
it say's in the ebay add it fits all 24 spline front diff's so im guessing you could use a front diff flange for the rear? only ask as my friend has a spare diff i can FOC also do i need to worry about back lash etc?
it say's in the ebay add it fits all 24 spline front diff's so im guessing you could use a front diff flange for the rear? only ask as my friend has a spare diff i can FOC also do i need to worry about back lash etc?
I picked up a 200 prop on ebay with a new flange kit inc the spacer, new bolts etc for £29 and it was local to me 
So its already for when my donut gives in, mind you in been putting up with a 2 lift and a bit of off roading for 18 months now and its still looks fine.
Seems some will cope and others dont?
.
So its already for when my donut gives in, mind you in been putting up with a 2 lift and a bit of off roading for 18 months now and its still looks fine.
Seems some will cope and others dont?
.
