P38A Bearmach Exhausts

Medway · Jan 26, 2020

P38 2.5 DSE - twin pipe

I noticed a hole in the exhaust today whilst under the car. Has anybody fitted Bearmach exhaust back boxes as I see they have a three year guarantee and seem keenly priced ?

I know SS would be fit and forget but I can't afford that at present. What have people fitted and what has fitted / lasted well ?

Thanks

Michael

tarphenry · Jan 26, 2020

I bought a used S/S one, been on 4 yrs now

Dopey · Jan 26, 2020

£159:50
https://www.ebay.co.uk/itm/RANGE-ROVER-P38-2-5TDi-DSE-CENTRE-amp-TWIN-REAR-EXHAUST-BOXES-97-02-/111001189267?_trksid=p2047675.l2557&ssPageName=STRK:MEBIDX:IT&nma=true&si=mTSYKD5MthNdbDmkOVHqn6njS7I%3D&orig_cvip=true&nordt=true&rt=nc

RangeRoller dt · Jan 26, 2020

I fitted a Britpart because it was cheap with 2yr guarantee. I got a single - are hard to find one without a peashooter pipe on the back.
I am happy with it

Henry had one on his 4.6 too but it fell apart after couple years, says he shoulda coated it with VHT before fitting would have helped it last.
Bearmach are pretty much the same.

Henry_b · Jan 26, 2020

Mine has a Bearmach standard mid section and the muffler peeled apart after 5 months, odd really..

As for backboxes mine are original

I gave 'em a whack with a hammer to break the baffles, now its throaty

Stainless is the best pound for pound upgrade in my opinion..

RangeRoller dt · Jan 26, 2020

You’ll get more POWER with a full exhaust Enry.
Mine is much better than driving around with just front pipe. Hell of lot quieter

Grrrrrr · Jan 26, 2020

RangeRoller dt said:
I fitted a Britpart because it was cheap with 2yr guarantee. I got a single - are hard to find one without a peashooter pipe on the back.
I am happy with it

Henry had one on his 4.6 too but it fell apart after couple years, says he shoulda coated it with VHT before fitting would have helped it last.
Bearmach are pretty much the same.

The stainless backbox I have was only available as "the sport". Looks like it is off an evo.

RangeRoller dt · Jan 26, 2020

I still don’t see why you reckon my back box Is sitting wrong?
Tucks up in there are perfect? Angled so it goes up in arch tidily

Grrrrrr · Jan 26, 2020

RangeRoller dt said:
I still don’t see why you reckon my back box Is sitting wrong?
Tucks up in there are perfect? Angled so it goes up in arch tidily

Trying to remember. Was it oval? Oval normally sits with long axis parallel to ground.

RangeRoller dt · Jan 26, 2020

Before -

After -

RangeRoller dt · Jan 26, 2020

I thought it would be flat to the ground but I think this is better.
Still caught it coming down off a bank, is why there was a welded pipe only on it before.

Henry_b · Jan 26, 2020

Grrrrrr · Jan 26, 2020

RangeRoller dt said:
I thought it would be flat to the ground but I think this is better.
Still caught it coming down off a bank, is why there was a welded pipe only on it before.

Yep, flat to the ground is what I would expect.

RangeRoller dt · Jan 26, 2020

And one of the badges to be straight

Medway · Jan 27, 2020

tarphenry said:
I bought a used S/S one, been on 4 yrs now

Henry_b said:
Stainless is the best pound for pound upgrade in my opinion..

I know this makes sense long term. I am looking for second hand stainless steel back boxes, if I can get them for the price of the new Bearmach mild steel ones, I'll be very happy.

Michael

Wazzajnr · Jan 27, 2020

I bought my last p38 gearbox and cats off eurocarparts if I remember correctly.
It was as cheap as the bearmach ones and lasted for 2 years until I laid it up. Still OK now but it's not been used so not done any work.

Grrrrrr · Jan 27, 2020

Wazzajnr said:
I bought my last p38 gearbox and cats off eurocarparts if I remember correctly.
It was as cheap as the bearmach ones and lasted for 2 years until I laid it up. Still OK now but it's not been used so not done any work.

You got a gearbox off them? Blimey!

Wazzajnr · Jan 27, 2020

Grrrrrr said:
You got a gearbox off them? Blimey!

How the hell did autocorrect manage to get gearbox from exhaust?
I suppose they both have an "x" in them!

RangeRoller dt · Jan 27, 2020

Always see 2nd hand stainless turning up
On The bay of E. Still not particularly cheap but will shave few £ off.

tarphenry · Jan 30, 2020

there are a couple of steel ones on marketplace on facebook today

P38A Bearmach Exhausts

New Member

Well-Known Member

Well-Known Member

Well-Sprung Member

Think outside, no box required.

Well-Sprung Member

Technician, Bodgit & Scarper Ltd

Well-Sprung Member

Technician, Bodgit & Scarper Ltd

Well-Sprung Member

Well-Sprung Member

Think outside, no box required.

Technician, Bodgit & Scarper Ltd

Well-Sprung Member

New Member

Well-Known Member

Technician, Bodgit & Scarper Ltd

Well-Known Member

Well-Sprung Member

Well-Known Member

Similar threads